Pomona SCTEST2

Product Highlights

• To test operator's path-to-ground to determine the personal grounding device is functioning correctly
• Separate test circuits for wrist straps and foot grounders by means of a rocker switch, allowing the operator to quickly test all personal grounding devices
• A green light indicates that the wrist strap or footwear is passing
• Red and yellow lights plus an audible alarm indicate when the wrist strap or footwear is failing; if failure occurs, the tester will also display if the grounding device's resistance is too low or too high
• The Combo Tester may also be used to test smocks or garments that feature a grounding mechanism for operators using a coiled cord connection
• Combo tester includes a stainless steel foot plate to test foot grounders
• Footplate has a molded insulative backplate with beveled edges, isolating the operator from the flooring to ensure accurate testing
• Each Combo Tester is calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology (NIST) and includes a NIST certificate

Features and Components

• 6-9VDC Power Jack: Input for an AC adapter (sold separately) to power the Combo Tester in permanent installation locations. *Use only the Desco 98256 and 98257 power adapters with the Combo Tester. Using any other power adapter may damage the unit and void the warranty.
• Test Results LEDs: Displays the test results.
• Foot Plate Jack: Connect the banana plug terminal of the foot plate cord here and the other end to the stainless steel foot plate.
• Rocker Switch: Toggle to the left when performing a footwear test. Toggle to the right when performing a wrist strap test.
• Single-Wire Wrist Strap Jack: Insert your single-wire wrist cord here to test your wrist strap.
• Test Switch: Push down and hold your finger here to perform a test.
• Low Battery LED: Illuminates when the battery power is low and needs to be replaced.