Gedore Tools DMZ 550

Product Highlights

Controlled screw tightening in the most common range of 20 - 850 N*m / 15 - 630 lbf*ft (guide for screws M7-10.9 to M24-8.8, M30-5.6). Adjustable, releasing and sturdy tubular torque wrench with spigot end for industry and the trades Features:. Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. Calibrated to a permitted +/- 3 % deviation and better. The specifications of the standard (+/- 4 %) are exceeded. For controlled bi-directional tightening. Sturdy, varnished tubular steel construction, with phosphated spigot end (Ø 16 mm or Ø 22 mm) and high-grade plastic parts. Ergonomically shaped plastic grip with calibration aid. Change-over between N*m main scale and lbf*ft ancillary scale to avoid reading errors when setting the torque wanted. With micrometre scale for main N*m scale for setting interim values. Release system triggers a tactile and audible signal. Ergonomic system for torque adjustment with reference symbol. Provision for rapid setting with hexagon allen key, not included. Secured adjusting/setting system. Factory depth gauge: 32 mm (Ø 16 mm) or 56 mm (Ø 22 mm). Operation only with end fittings with standardised depth gauge - otherwise inaccuracies may arise. Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).

• Length (L, L1): 912.7 mm
• Width: 36.5 mm
• Scale Divisions: 10 N*m
• Range of Work / Measurement Nm (min/max): 110-550 N*m
• Depth Gauge (C, L): 56 mm
• Range of Work / Measurement lbf.ft (Min/Max): 80-405 lbf*ft
• Drive Connector Pin: 22 mm
• Packing Unit: 1 Piece
• Distance from Middle of Handgrip to Pivot Point: 831.4 mm
• Distance from Middle of Screw to Pivot Point: 37 mm
• Scale Ring Graduation: 1 N*m N*m
• Weight: 3.28 kg