Fluke 8810A 5.5 Digit Digital Multimeter with Option 08: AC Converter
5-1/2 Digit Multimeter
Order #: 8810A-RENT2
Mfg #: 8810A-RENT2
Call for price
Call for price
Fluke 8810A 5.5 Digit Digital Multimeter with Option 08: AC Converter
5-1/2 Digit Multimeter
Order #: 8810A-RENT2
Mfg #: 8810A-RENT2
Call for price
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Call for price
Availability: Call for Availability
Fluke 8810A Highlights
The Fluke 8810A is a low cost, 5½-digit voltmeter/DMM. It is a high precision autoranging meter that offers a number of options. With the basic configuration, the 8810A is a voltmeter. Options add resistance, AC voltage, and TRMS measurement.
- Ranges: ±200 mV, ±2 V, ±20 V, ±200 V, ±1200 V
- DC input resistance: On 200 mV to 20 V range is ≥1000 MΩ, on 200 V to 1200 V range is 10 MΩ
- Normal Mode Noise Rejection: ≥60 dB
- Common Mode Noise Rejection: ≥120 dB
- Resolution: 1 µV on 200 mV range
- Overload protection on 200 mV to 20 V range: ±1000 Vdc, 1400 Vpeak ac
- Overload protection on 200 V, 1200 V range: ±1200 Vdc, 1700 Vpeak ac
- Offset current: <15 pA
- Full autoranging (rated at 600 ms maximum per range change) or manual ranging
- Automatic bipolar, + or - display
- Reading rate: 2.5 readings per second, within the same range
- MTBF: 10,000 hours calculated, minimum
- Maximum Common Mode Voltage: 1000 VDC or peak AC
- Maximum Lo to GUARD Voltage: 100 VDC or peak AC
- Data Output Unit (Option 002)
- Available data: Digits, Polarity, Range
- Data output form: Isolated BCD, with compatible TTL/DTL levels
- Data coding: 8-4-2-1 BCD positive-true parallel
- Drive capability: All outputs an drive a minimum of two TTL loads
- Flags: Busy, not Busy, Overload
- Controls: External trigger, external trigger enable, +5 V reference
- Ohms Converter (Option 007)
- Ranges: 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2000 kΩ, 20 MΩ
- Resolution: 1 mΩ on 200 Ω range
- Overvoltage protection: 300 Vrms or dc, applied continously to any range
- Maximum open circuit voltage: 3.3 V
- Response time: 1.0 s maximum to displayed input on 200 Ω to 200 kΩ range
- AC Converter (Option 008)
- Ranges: 2 V, 20 V, 200 V, 750 V
- Input impedance: 2 MΩ shunted by <100 pF
- Resolution: 10 µV on 2 V range
- Overload protection: 750 Vdc or rms sinewave, not to exceed 2 x 107 volts hertz product
- TRMS Converter (Option 009)
- Ranges: 2 V, 20 V, 200 V, and 750 V
- Resolution: 10 µV
- AC input impedance: 1 MΩ in parallel with 100 pF
- Crest factor: 3.0
- Response time: 1.5 s
- Overload protection: 500 Vdc or 750 Vrms or 1100 Vpea
Related Products
- Fluke 8505A for Rent, Digital Multimeter, 5.5 Digit Readings at 500/secDMM 5-1/2 Digit Readings at 500/secCall for price
- Fluke 77 for Rent, Digital Multimeter, 1000V DC/AC 10A DC/AC, 32 MohmDigital Multimeter, 1000V DC/AC 10A DC/AC, 32 MohmCall for price
- Fluke 789 for Rent, ProcessMeter, Digital Multimeter and Loop CalibratorProcessMeter, DMM and Loop CalibratorCall for price
- Tektronix 067-1338-00 for Rent, Calibration Step GeneratorCalibration Step GeneratorCall for price
- Keysight 3468A for Rent, Autoranging Digital Multimeter, 5.5 Digit, DC VoltsAutoranging Digital Multimeter 5.5 Digit, DC VoltsCall for price
- Fluke 787 for Rent, ProcessMeter, Digital Multimeter and Loop CalibratorProcessMeter, DMM and Loop CalibratorCall for price
- Fluke 8520A for Rent, Digital Multimeter with IEEE-488 ConnectionDigital Multimeter IEEE-488 ConnectionCall for price
-
-
- Keysight 34401A for Rent, Digital Multimeter, 6.5 Digit Resolution, 1000V Max InputDigital Multimeter 6.5 Digit Resolution, 1000V Max InputCall for price
- Fluke 233 for Rent, Digital Multimeter with Wireless DisplayDigital Multimeter with Wireless DisplayCall for price
- Fluke 287 for Rent, True-RMS Electronics Logging Multimeter with Trend CaptureTrue-RMS Electronics Logging Multimeter with Trend CaptureCall for price
-
-
- Fluke 433 for Rent, Three-Phase Power Quality AnalyzerPower Quality Analyzer Three-PhaseCall for price
-
- Fluke 8508A for Rent, Reference Multimeter, 8.5-Digit resolution, True Ohms measureReference Multimeter 8.5-Digit resolution, True Ohms measureCall for price
- Fluke 8050A for Rent, Digital Multimeter, 4.5 Digit Portable with Option 001DMM 41/2 Digit Portable with OPT 001Call for price
-
- Keysight 3478A for Rent, Digital Multimeter, 3.5 to 5.5 digit resolution, 100nV SensDigital Multimeter 3? to 5? digit resolution, 100nV SensCall for price
How to Rent from Transcat
1. Select Your Rental Product
- Need help selecting a unit? Try using our Product Finder or search our available units
- Can’t find what you are looking for? Is the rental unit you need, not available? Give us a call at 800-828-1470 or our chat feature to speak with one of our dedicated Rental Experts
2. Contact Our Team of Rental Experts
- Contact us here or click below to submit your request for a rental quote and a member of our Rental Team will review the request and will reach out to you very soon
3. Select Your Rental Period & Complete Your Order
- Our weekly period lasts 7 calendar days, while our monthly rental period lasts 28 calendar days
- Provide your form of payment, sign the rental agreement and any other required documents, and we will ship you the unit