Fluke Networks DSX2-5-IE-K1 Industrial Ethernet DSX Kit 1

Industrial Ethernet DSX Kit 1

Order #: DSX2-5-IE-K1

Mfg #: 5081185

New

Skip to the end of the images gallery

Skip to the beginning of the images gallery

$13,446.99

Availability: Ships in 4-6 weeks

Ships Free Over $100

This product is available for shipping to the United States and Puerto Rico only.

Product Overview

Product Highlights

Industrial environments are much harsher and more time sensitive than traditional IT environments. Ethernet packets can be corrupted (CRC, FCS errors) causing packet re-sends which increases latency which can disrupt communications resulting in production delays.

Cables that appear good and pass basic continuity and speed tests can be susceptible to vibration, moisture and contamination, temperature changes, and electromagnetic noise in a manner that causes ethernet packets to be intermittently corrupted.

The DSX Industrial Ethernet CableAnalyzer™ (DSX2-5-IE-K1) is based on the Fluke Networks DSX-5000 and supports testing copper Industrial Ethernet networks and has optional modules to support fiber optics.

Validate that cables conform to international standards.
Faster Startup: Ensure cable performance at machine builder, commissioning and after making changes.
Prevent downtime: Find marginal cables susceptible to vibration, moisture, noise and temperature.
Speed troubleshooting: Avoid wasting time installing bypass cables.
Identify the exact type and location of cable failure—or prove it

Specifications

DSX CableAnalyzer Series Specifications
Cable Types
Shielded and unshielded pair LAN cabling	TIA Cat 3, 4, 5, 5e, 6, 6A, 100 Ω ISO/IEC Class C, D, E, EA, F, FA and I/II: 100 Ω and 120 Ω
Standard Link Interface Adapters
Permanent link adapters	Plug type: shielded RJ45 Optional Plug type: Tera
Channel Adapters	Jack type: shielded RJ45 Optional Jack type: Tera, GG45
Test Standards
TIA	Cat 3, 4, 5, 5e, 6, 6A, 8 per TIA 568 Series
ISO/IEC	Class C, D, E, EA, F, FA, I/II certification per ISO/IEC 11801 Series
Maximum frequency	DSX-5000 1000 MHz
General Specifications
Autotest Time	DSX-5000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 9 seconds Full 2-way Autotest of Cat 6A/Class EA: 10 seconds
Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests)	Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-tocrosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)
Input protection	Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
Display	5.7 in LCD display with a projected capacitance touchscreen
Case	High impact plastic with show absorbing overmold
Dimensions	Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
Weight	Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg)
Main unit and remote	Lithium ion battery pack, 7.2 V
Typical battery life	8 hours
Charge time*	Tester off: 4 hours to charge from 10 % capacity to 90 % capacity
Languages supported	English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian
Calibration	Service center calibration period is 1 year
Integrated Wi-Fi	Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz)