Ametek MX30-3PI-208

Product Highlights

The MX Series consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications.  This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using state-of-the-art PWM switching techniques, the MX series combines compactness, robustness and functionality in a compact floor-standing chassis, no larger than a typical office copying machine. This higher
power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. Simply roll the MX3 unit to its designated location (using included casters), plug it in, and the MX series is ready to work for you.

The MX Series can be operated completely from its menu driven front panel controller. A backlit LCD display shows menus, setup data, and read-back measurements. IEEE-488, RS232C, USB and LAN remote control interfaces and instrument drivers for popular ATE programming environments are available. This allows the MX Series to be easily integrated into an automated test system.

For advanced test applications, the programmable controller version offers full arbitrary waveform generation, time and frequency domain measurements, and voltage and current waveform capture.

The MX30 delivers up to 30 kVA. This model operates using single or three phase output in AC mode. In DC mode, 50% of the AC power level is available. On MX-P models, AC+DC mode is also supported.

• High Power AC and DC Power Source
• Programmable AC and DC power for frequency conversion and product test applications
• Expandable Power Levels
• Available output power of 30kVA per unit and multi-unit configurations for power requirements up to 135 kVA and above
• Single and Three Phase Mode
• Phase mode programming on MX30-3Pi allows switching between single and
• three phase output modes
• Arbitrary & Harmonic Waveform Generation
• User defined voltage waveform and distortion programming
• Regenerative, bidirectional “Green” Power Solution
• Automatic crossover between Source and Sink power mode offers regenerative capabilities in AC
• mode. Regenerate up to 100% of the rated output power back to the utility grid during sink mode
• operation. ( -SNK option )
• Remote Control
• Standard RS232C & USB along with optional IEEE- 488 & LAN Interfaces are available for automated
• test applications

NOTE: This instrument is extremely heavy unit and needs to ship freight. Orders must be placed before 4 pm ET / 1 pm PT to allow time for scheduling freight pickup.