AEMC 6418

Ground Resistance Tester

Order #: 6418

Mfg #: 2141.03

Questions about availability or need help? Contact Us:

(800) 633-0561
$1,495.00

AEMC 6418

Ground Resistance Tester

Order #: 6418

Mfg #: 2141.03

$1,495.00
Availability: Item ships in about Ships in 1-2 weeks
Available Promotions

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

The Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.

Product Highlights

  • Ground Integrity® Measurement
  • Large multi-function bright yellow organic LED display (OLED) 48 x 39mm
  • Clamping diameter accommodates both cable and bus bar
  • Storage of measurements (Ω and/or A, with time-stamping)
  • Up to 300 measurements stored
  • View stored measurements on the OLED display
  • Auto Power OFF function
  • Auto Hold
  • Alarm function with adjustable set point and buzzer for quick field checks for amps and ohms
  • Rugged Lexan® head and body construction resists breakage
  • Alarm settings stored memory information saved during shutdown
  • Noise icon and buzzer alert user to presence of dangerous current levels/li>
  • Designed to EN 61010-1, 100V CAT IV 150V CATIII safety standards
  • Automatic calibration of the jaw gap at power-up

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Ground Resistance Measurement 
Measurement Range Resolution Accuracy
0.010 to 0.099Ω 0.001Ω ±(1.5%Reading +0.01Ω)
0.10 to 0.99Ω 0.01Ω ±(1.5%Reading +0.02Ω)
1 to 49.9Ω 0.1Ω ±(1.5% Reading +0.1Ω)
50.0 to 149Ω 1Ω ±(2.5% Reading +2Ω)
150 to 245Ω 5Ω ±(5% Reading +10Ω)
 250 to 440Ω 10Ω ±(10% Reading +20Ω)
450 to 640Ω 10Ω ±(15% Reading +20Ω)
 650 to 1200Ω 50Ω ±(20% Reading +100Ω)
Test Frequency 2083Hz
Maximum Overload Permanent current: 100 max. 50/60Hz; 20A at 800Hz
Current  Measurement Range (Auto-Ranging)
Measurement Range Resolution Accuracy
0.50 to 9.995mA 50µA ±(2% Reading +200µA)
10.00 to 99.90mA 100µA ±(2% Reading +100µA)
100.0 to 299.0mA 1mA ±(2% Reading +1mA)
0.300 to 2.990A 10mA ±(2% Reading +10mA)
3.000 to 20.00A 100mA ±(2% Reading +100mA)
General Features
Display OLED, 152 segments 48x39mm
Memory 300 measurements
Alarm 2 separate alarms (Ω and A)
Power Source 4x1.5V LR6 (AA) alkaline batteries or 4 NiMH batteries
Battery Life 12 hours or 1440 30-seconds tests approx.
Jaw Opening 1.26” (32mm) max or 1.18  1.57" (30 x 40mm) or 0.79 x 2.17" (20 x 55mm) bar
Dimensions 11.8 x 4.2 x 2.2” (300 x 106 x 56mm)
Weight (with Battery) 2.6 lbs (1.2Kg)
Operating Temperature -4° to +131°F (-20 to +55°C)
Storage Temperature -22° to +158°F (-30 to +70°C)
Relative Humidity Up to 90% @ 40°C
Ingress Protection (IP) IP 40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32, Pollution Degree 2,  100V CAT IV