Gossen Metrawatt PROFITEST PRCD

Adapter for testing of PRCD-K and PRCD-S

Order #: PROFITEST PRCD

Mfg #: M512R

Questions about availability or need help? Contact Us:

(800) 633-0561
$1,408.00

Gossen Metrawatt PROFITEST PRCD

Adapter for testing of PRCD-K and PRCD-S

Order #: PROFITEST PRCD

Mfg #: M512R

$1,408.00
Adapter for standards compliant testing of type S and K PRCDs by simulating faults per DIN VDE 0701-0702, VDE 0661, BGI / GUV-I 608 and manufacturers' specifications. According to DIN VDE 0661, portable protective devices are circuit breakers which can be connected between power consuming devices and a permanently installed electrical outlet by means of standardized plug-and-socket devices. They offer the increased levels of protection provided by protective measures utilized in electrical systems for the prevention of dangerous shock current as defined in DIN VDE 0100-410. These portable protective devices serve to protect persons from electrical accidents in the low-voltage range from 130 to 1000 V, and consequently have to be suitable for commercial use. The SPE-PRCD (switched protective earth - portable residual current device) is available in different variants. Amongst other possibilities, they can be installed like an extension cord between a power consumer (as a rule a power tool) and en electrical outlet. Testing of Type S and K PRCDs by Simulating Errors with the Profitest PRCD and the Profitest MXTRA.
Availability:
Item discontinued

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Testing of the following types of portable protective devices:

  • PRCD-S (single-phase / 3-pole and 3-phase / 5-pole)
  • PRCD-K (single-phase / 3-pole)
  • PRCD (2-pole / 3-pole)

Function test, i.e. tripping test by means of simulating the following faults:

  • Interruption
  • Wire reversal
  • PE to phase

Product Highlights

  • Measurement of protective conductor current with current clamp transformer
  • Measurement of protective conductor and insulation resistance with the PROFITEST MXTRA tester
  • Tripping test with nominal residual current and measurement of time to trip with PROFITEST MXTRA tester
  • Evaluation and documentation of the individual test steps with the PROFITEST MXTRA tester and ETC software

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

All products in this series