Fluke 787 VIP Kit
Order #: 787E-VIP
Mfg #: FLUKE-787
Fluke 787 VIP Kit
Order #: 787E-VIP
Mfg #: FLUKE-787
Only need this item for a short time? Learn about rentals
Overview
Double Your Power
A maintenance and calibration tool that will be at home in every instrumentation technician's tool box,the Fluke 787 ProcessMeter™ combines a DMM and a loop calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution.
Want a built in 24-Volt loop supply and 250 Ω HART resistor? Consider the Fluke 789.
Product Highlights
- Fluke 787 Processmeter with FREE Test Leads, FREE Carrying Case, and FREE Calibration Labels
- Over $100 in Savings
- Exclusively from Transcat!
- 787- DMM and loop calibrator in one tool. Precision 1000V, 440 mA digital multimeter. Measures AC & DC volts, AC & DC current, resistance, continuity, and frequency.
- FREE Comprehensive Test Lead Kit - includes 1 Pair Modular, Double Insulated, Silicone Leads, 48”, 1 Pair Extra Sharp, Stainless Steel Probes, 1 Pair Fully Insulated Large Crocodile Clips, 1 Pair Thin Spikes, 1 Pair Sprung Hooks, 1 Pair Fully Insulated Small Crocodile Clips, 1 Pair Probe Tip Insulation Extenders Packed In a Silver Tool Roll for Convenient Storage
- FREE C-101 Universal Vinyl Carrying Case with its zippered sections holds multimeters, single function calibrators, ect. Velcro pouch for leads and accessories. Snappable belt loops on back hold up to a 4" wide belt.
- FREE Pack of Green Calibration Labels
Each Unit Includes
- 787 Process Meter
- Test Leads
- C-101 Carrying Case
- Calibration Labels
- Protective Yellow Holster with Flex-Stand (C81Y)
- One 9V Alkaline Battery (Installed)
- Users Manual
- Quick Reference Guide
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
- Fluke TLK-225SureGrip Master Accessory Set
Order #: TLK225
Mfg #: 2097031
Availability:Out of stockSpecial Price $152.99 Regular Price $169.99 - Silvertronic 129527Universal Test Probe Set
Order #: 65135MM
Mfg #: 129527
Availability:Out of stockSpecial Price $41.84 Regular Price $44.05 - Fluke 80T-150UUNIVERSAL TEMPERATURE PROBE
Order #: 80T-150U
Mfg #: 80T-150U
Availability:Out of stockCall for price - Fluke TL220Industrial Test Lead Set for All Fluke Meters
Order #: TL20
Mfg #: 2003625
Availability:Out of stockSpecial Price $76.49 Regular Price $84.99 - Fluke C1600Gear Box for Meter and Accessories
Order #: C1600
Mfg #: 2091049
Availability:Out of stockSpecial Price $76.49 Regular Price $84.99
Specifications | ||
Current measurement | Range | 0-1 A |
Resolution | 1 mA | |
Accuracy | 0.2% + 2 LSD | |
Range | 0-30 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.05% + 2 LSD | |
Current sourcing | Range | 0-20 mA or 4-20 mA |
Resolution | 0.05% of span | |
Drive Capability | 500 Ω @ 24 mA | |
Frequency | To 19.999 kHz, 0.005% + 1 LSD | |
Continuity | Beeps for resistance < 100 ohms | |
Voltage measurement | Range | 0-1000 V AC or DC |
Resolution | 0.1 mV to 1.0 V | |
Accuracy | 0.1% Rdg + 1 LSD (VDC) | |
Resistance measurement | To 40 MΩ, 0.2% + 1 LSD | |
Diode test | 2.4 V shows diode voltage drop | |
Environmental Specifications | ||
Operating temperature | -20°C to 55°C | |
Storage temperature | -40°C to 60°C | |
Humidity (without condensation) | 95% up to 30°C | |
75% up to 40°C | ||
45% up to 50°C | ||
35% up to 55°C | ||
Temperature coefficient | 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C) | |
Safety Specifications | ||
Electrical safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 | |
Overvoltage category | IEC 1010-1 CAT III | |
Maximum voltage | 1000 V rms | |
Mechanical and General Specifications | ||
Size | 32 x 87 x 187 mm | |
Weight | 369 g | |
Batteries | Single 9 V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61) | |
Warranty | 3 years | |
Battery life | 50 hours typical (measurement), 12 hours typical (sourcing 12 mA) | |
Shock and vibration | Random, 2 g, 5-500 Hz | |
1 meter drop test | ||
Display current and % of span | Yes | |
Auto step, auto ramp | Yes |