Endress+Hauser RIA15-F1B2+NBPAPB
Loop Powered Indicator for 4- 20mA or HART Signals & Acc.
Order #: RIA15-F1B2+NBPAPB
Mfg #: RIA15-F1B2+NBPAPB
Endress+Hauser RIA15-F1B2+NBPAPB
Loop Powered Indicator for 4- 20mA or HART Signals & Acc.
Order #: RIA15-F1B2+NBPAPB
Mfg #: RIA15-F1B2+NBPAPB
See our Endress + Hauser RIA15 Loop Powered Indiator Family Page for an ordering guide and all configurations.
The process indicator is available with 4...20 mA or with HART® protocol. In the HART® version up to 4 measured values of one sensor can be indicated in alternation. For this the indicator can be set as primary or secondary HART® master and actively inquire the values from the sensor. The small voltage drop of < 1V (< 1.9 V with HART®) is a huge advantage especially in Ex-applications, where in most cases only a reduced voltage is available.
Only need this item for a short time? Learn about rentals
Product Configuration
- F1 Approval: FM IS, CI. I, Div. 1, Gr. ABCD
- B Housing: Field housing Alu 131x81.5x55.5mm
- 2 Input: 4...20mA current signal + HART
- NB >Accessory Mounted: 2x adapter M16 on NPT1/2
- PA >>Accessory Enclosed: Blind plug M16
- PB Mounting kit wall/pipe 316L for field housing
Product Highlights
- Display of 4 to 20 mA measured values or optionally up to four of a sensor's HART® process variables in all industries; Use as primary or secondary HART® master
- 5-digit measured value display with 17 mm (0.67") character height with dimension and bargraph; backlight can be activated
- Panel-mount housing (IP65) or field housing (IP66; Ex approval) as local display; Minimal installation depth
- No external power supply required; Voltage drop ≤1 V (HART® ≤1.9 V)
- Easy 3-key operation for configuring the device
- International approvals
- SIL interference freeness acc. to EN 60508
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO