Dwyer Instruments 1430

Portable Electronic Point Gage 0-2"wc Range w/Case

Order #: 1430

Mfg #: 1430

Questions about availability or need help? Contact Us:

(800) 633-0561
$1,416.00

Dwyer Instruments 1430

Portable Electronic Point Gage 0-2"wc Range w/Case

Order #: 1430

Mfg #: 1430

$1,416.00
Availability:
Item discontinued

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Accurate to ±.00025" w.c., Battery Operated, Self-Contained
  • Fast, accurate pressure measurements at moderate cost
  • Combines modern, solid state integrated circuit electronics with the time proven point gage manometer
  • Delivers repeatable accuracy in measuring positive, negative or differential pressures to ±.00025" water column over a 0 to 2" w.c. range
  • Metric model M1430 reads from 0-50 mm w.c. Calibrates other instruments. Provides high precision for test laboratories of manufacturers of fans, air conditioning and heating equipment, pneumatic or fluidic controls, etc
  • Used in college, university and consultant laboratories — wherever precision measurements are required
  • Used with pitot tube (at extra cost) for precision measurement of low air velocities
  • Measures positive, negative or differential pressures to 2.0" w.c.
  • Easy to maintain and clean
  • Battery replacement and instrument cleaning are quick and simple-use mild soap and water
  • Indicating fluid consists of distilled water and a small amount of Dwyer® A-126 Fluorescein green color concentrate Max. press. 100 psig (6.89 bar)
  • Microtector® Gage – A Durablock® solid, precision machined acrylic plastic body, mounted on heavy, 1/2" thick steel base, 3-point base mounting has two leveling screws and level vial for quick setup
  • Gage Meter – Sensitive 0-50 microamp D.C. meter acts as detector. Powered by 1-1/2 volt penlight cell (included)
  • No external power needed. Meter also indicates battery and hook probe condition
  • Electronic Circuitry – Solid state integrated circuit electronic components are mounted on glass epoxy board enclosed in a molded styrene acrylonitrile compartment for protection. A.C. Detector current eliminates hook plating
  • Micrometer – Adjusts point with precision. Complies with Federal Specification GGG-C-105C and is traceable to a master at the NIST

Each Unit Includes

  • Two 3-foot Lengths of Tygon Tubing
  • Two 1/8" Pipe Thread Adapters Micrometer Wrench
  • Crocus Cloth for Cleaning Point
  • Carrying Case/Cover
  • Dwyer Gage Fluid 3/4 oz
  • 1 1/2 volt penlight cell

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO