SPM Instrument INSMB4V

Intellinova Parallel Meas Unit, Vib/DuoTech,4Ch,24 VDC,Rail mt

Order #: INSMB4V

Mfg #: INSMB4V

Questions about availability or need help? Contact Us:

(800) 633-0561
$2,224.80

SPM Instrument INSMB4V

Intellinova Parallel Meas Unit, Vib/DuoTech,4Ch,24 VDC,Rail mt

Order #: INSMB4V

Mfg #: INSMB4V

$2,224.80
Availability: 2-3 weeks
Available Promotions

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

Intellinova Parallel MB VIB/Dual technology is a small unit for parallel measurement on four channels, monitoring operating condition by means of:

  • Vibration measurement (ACC, VEL, DISP rms, HD ENV)
  • Symptom values (BPFO etc.)
  • Spectrum
  • Time signal
  • Shock pulse measurement incl. lubrication condition (HDm/HDc, LR/HR)

The ACC, VEL and DISP rms values are measured within a user defined frequency range. The symptoms are defined by the user as a fundamental frequency and its harmonics where sidebands can be included.

A spectrum or time signal can also be generated for further processing. A cumulative moving average is calculated for all measured parameters and symptoms. These averages can also be used to trigger alarms. Both vibration and shock pulse measurements can be performed using DuoTech accelerometers that use a standard IEPE interface.

A DIO (Digital Input Output) configured as an input can be used to activate a measurement. Measuring results and symptom values are compared with an alarm level set up and can activate any of the 6 DIOs which can control, e.g. a relay. Alarms can be set with or without delay, based either on time or number of measurements. The unit can be set up to repeat its configured measurements as often as possible, and a LED for every channel indicates the status of the latest measurement. Two RPM inputs can be used for measurements based on order tracking.

The unit can operate in online or offline mode, selected by rotary switches on the front. When set to online mode, the unit operates as a Modbus RTU where the Modbus master configures the measurements and reads the result. When run in offline mode, the measurements are defined in an internal text file created in the configuration software PRO230. The text file can contain a large number of unique configurations selected with the rotary switches on the front panel. The text file is transferred to the unit using the COM port, which is also used for updating the firmware.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO