SPM Instrument SLD144S-UNF

VIB Transducer, 2Hz-10kHz, side entry, 2-pin, 1/4-28UNF

Order #: SLD144S-UNF

Mfg #: SLD144S-UNF

Questions about availability or need help? Contact Us:

(800) 633-0561
$376.80

SPM Instrument SLD144S-UNF

VIB Transducer, 2Hz-10kHz, side entry, 2-pin, 1/4-28UNF

Order #: SLD144S-UNF

Mfg #: SLD144S-UNF

$376.80
Availability: Ships in 2-3 weeks
Available Promotions

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Use the sealed connector
  • IP67 Sealing
  • UNF 1/4" Thread
  • Flat surface min. 35 mm in diameter
  • Compatible with 2 pin MILC-5015 style

The vibration transducers series SLD144S are piezo-electric accelerometers of compression type with side entry and built-in electronics, designed for vibration monitoring of industrial machinery. The electrical signal is isolated from the transducer housing.

The transducer is mounted against a smooth, flat surface min. 35 mm in diameter (min. 16 mm is required when using mounting base SPM 15757 or 15802). The transducer has a captured bolt for mounting and is connected via a twisted pair cable with 2 pin connector. In moist environment, use the sealed connector with integrated measuring cable SPM 46105-L/46106-L together with cable protection tube SPM 81385.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

General Specifications
Thread UNF 1/4"
Nominal sensitivity, main axis 10 mV/m/s2 * =100 mV/g
Transverse sensitivity max. 10%
Typical base strain sensitivity 0.01 m/s2/µ strain
Linear frequency range 2 Hz to 10 kHz (±3 dB )
Max. peak acceleration 600 m/s2 = 60 g
Settling time 3 sec
Bias point 11 to 14 V (typical 12 V)
Temperature range -40° to +125° C (-40° to 260° F)
Power requirements 24 V /2 to 5 mA
Casing Stainless acid proof steel
Sealing IP67 together with appropriate connector
Isolation Case isolated, > 1 Mohm
Torque limit 10 Nm (7.4 lbf.ft)
Weight 200 grams (7 oz)
Connector type Compatible with 2 pin MILC-5015 style