Fluke PM2811 Used for Sale

30V/10A, Programmable Power Supply, Single Output, GPIB

Order #: PM2811-USED

Mfg #: PM2811

Questions about availability or need help? Contact Us:

(800) 633-0561
$899.00

Fluke PM2811 Used for Sale

30V/10A, Programmable Power Supply, Single Output, GPIB

Order #: PM2811-USED

Mfg #: PM2811

$899.00

Used instruments from TranscatTranscat is a Premier Supplier Used Test and Measurement Equipment. Many options are available for a variety of instruments. Contact Transcat for all your used equipment needs.

Availability: Item ships in about Ships in 2-3 weeks
Available Promotions
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This item is available as RENTAL at
Call for price
Shop now
Questions about this product? Speak to an expert

Fluke PM2811 Highlights

  • OUTPUT module 30 V - 10 A - 60 W
  • Output Voltage range 0 to 30 V
  • Output Current range 0 to 10 A
  • Output Power 60 W
  • Overvoltage protection range 2 to 32 V
  • Accuracy (at calibration temperature)
  • Output Voltage +/- 0.04 % of setting + 10 mV
  • Output Current +/- 0.1 % of setting + 50 mA
  • Over Voltage Protection +/- 0.5 % of setting + 150 mV
  • Temperature coefficient
  • Output Voltage (0.016 % of setting + 2 mV)/K
  • Output Current (0.05 % of setting + 2 mA)/K
  • Long term drift (in an 8 hour period)
  • Output Voltage 0.04 % of setting + 5 mV
  • Output Current 0.05 % of setting + 10 mA
  • Programming Resolution (12bit)
  • Output Voltage 7.5 mV/LSB
  • Output Current 2.5 mA/LSB
  • Over Voltage Protection 7.5 mV/LSB
  • Source Effect (for any line voltage change within rating)
  • Voltage +/- (0.01 % of setting + 2 mV)
  • Current +/- (0.02 % of setting + 2 mA)
  • Load Effect (load change 10 % to 90 % or 90 % to 10 % full load)
  • Constant Voltage +/- (0.01 % of setting + 5 mV)
  • Constant Current +/- (0.02 % of setting + 5 mA)
  • Load cross regulation Negligible for both voltage and current
  • Output Noise (PARD)
  • Constant Voltage pp/rms 15 mV/3 mV
  • Constant Current rms 10 mA
  • Switching Frequency approx. 20 kHz approx.
  • READBACK ACCURACY:(referred to the output terminals)
  • Accuracy (at calibration temperature)
  • Voltage +/- (0.05 % + 25 mV)
  • Current +/- (0.1 % + 30 mA)
  • Measuring Resolution (12 bit)
  • Voltage resolution to interface 7.5 mV
  • Current resolution to interface 2.5 mA
  • Voltage resolution to display 10 mV
  • Current resolution to display 10 mA
  • Max. Current at Reverse voltage 10 A
  • REMOTE SENSE > 0.25 Volt drop per lead (at open sense connections, the output voltage will not be more than 3 V above the programmed value)
  • DYNAMIC OPERATION I=1 A between 1 and 10A between 0.5 and 5A between 1 and 10A
  • Settling band +/- 50 mV
  • dI/dt < 1 A/s
  • Overshoot < 150 mV
  • Recovery time < 1 ms
  • Programming response (measured with resistive load)
  • Up (0 V to max. output) 100 ms @ 2 A
  • Up (0 V to max. output) 50 ms @ (no load)
  • Down (max.output to 1 V) 100 ms @ 2 A
  • Down (max.output to 1 V) 50 ms @ (no load)
  • Reprogramming delay
  • Range 50 ms to 60 s
  • Resolution 1 ms
  • Default 50 ms
  • Step Interval time up to 60 s
  • GPIB

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO