Keysight Technologies N9912A for Rent

FieldFox Handheld RF Analyzer 4GHz and 6GHz

Order #: N9912A-RENT2

Mfg #: N9912A-RENT2

Questions about availability or need help? Contact Us:

(800) 633-0561
Call for price
Call for price

Keysight Technologies N9912A for Rent

FieldFox Handheld RF Analyzer 4GHz and 6GHz

Order #: N9912A-RENT2

Mfg #: N9912A-RENT2

Call for price
Call for price


Contact Transcat's Rental Team

Availability:
In stock
Available Promotions
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This item is available USED at
$17,996.00
Shop now
This item has NEW version starting at
$8,529.00
Shop now
Questions about this product? Speak to an expert

Product Highlights

  • 2 MHz to 4/6 GHz
  • Directivity > 42 dB
  • CAT: Distance-to-fault, return loss, cable loss
  • VNA: S11 mag and phase, S21 mag, time doman with gating

Spectrum Analyzer, Interference Analyzer

  • 5 kHz to 4/6 GHz
  • DANL: -148 dBm, +18 dBm TOI
  • Spectrogram, waterfall display, record, and playback

Independent Source, Vector Voltmeter (VVM), Power Sensor and Channel Power Measurements

  • RF source: 2 MHz to 4/6 GHz, CW and tracking
  • VVM: 2 MHz to 4/6 GHz, compare phase and electrical length
  • Average and peak power measurements with USB sensor
  • Channel power measurements: 100 kHz to 4/6 GHz, no sensor needed

FieldFox Instrument Attributes

  • New: Remote control via iPad or iPhone
  • Battery life: 4-hours; weight: 2.8 kg or 6.2 lbs
  • Operating temperature: -10 to +55 °C (14 to 131 °F)

Applications

  • Cell site management - cable and antenna test
  • RF spectrum monitoring and interference analysis
  • Active and passive device test

Accuracy

  • Get precise measurements that agree with benchtop results
  • QuickCal - Built-in calibration - no cal kit required
  • CalReady - Immediate distance-to-fault measurements at the test port

Rugged

  • Dust-free design with no fans, no vents extends instrument reliability in harsh environments
  • Water-resistant; withstands salty, humid environments
  • MIL-PRF-28800F Class 2 compliant
  • GPS data with external USB GPS receiver

FieldFox RF analyzers are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox - and boost your readiness.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Maximum Frequency 4 or 6 GHz
CAT/VNA Start Frequency 2 MHz
SA Start Frequency 5 kHz
Dynamic Range 49 dB
Output Power < 7 dBm
Trace Noise n/a
Number of Built-In Ports 2 ports
Best Speed at 201 Point, 1 Sweep 240 ms
Instrument Type Combination Analyzer
Cable and Antenna Analyzer Yes
Spectrum Analyzer Yes
Vector Network Analyzer No
Applications
  • Distance-To-Fault
  • Cable Trimming
  • Return Loss
  • Insertion Loss/Gain
  • Interference Analysis
  • Power Measurements
Components
  • Cables
  • Antennas
  • Amplifiers
  • Filters
  • 75 Ohm CATV Devices
Additional CAT/VNA Based Features
  • QuickCal (Subset)
  • Vector Voltmeter
Additional SA Based Features Built-In Power Meter
System Features GPS Receiver - External Only
Power Measurement Using USB Sensor
  • CW or Swept-Frequency
  • Frequency-Offset
  • RF Pulse Test with Peak Sensor
Standard Attenuator Range 31 dB
Standard Attenuator Step 1 dB
Maximum Dynamic Range 3rd Order @1 GHz n/a
DANL @1 GHz -148 dBm
Maximum Analysis Bandwidth n/a
Phase Noise @1 GHz (1 MHz offset) -115 dBc/Hz
Phase Noise @1 GHz (10 kHz offset) -88 dBc/Hz
TOI @1 GHz (3rd Order Intercept) +18 dBm
Applications Available Yes
Frequency 5 kHz to 6 GHz
Overall Amplitude Accuracy ±0.5 dB
Bandwidth Options 5 MHz
Applications-General Purpose
  • AM/FM Tune and Listen
  • Cable Fault Location
  • Field Strength Measurement
  • Spectrogram
  • Stimulus Response
Handheld Yes

How to Rent from Transcat

Rent from Transcat - Step 1

1. Select Your Rental Product

  • Need help selecting a unit? Try using our Product Finder or search our available units
  • Can’t find what you are looking for? Is the rental unit you need, not available? Give us a call at 800-828-1470 or our chat feature to speak with one of our dedicated Rental Experts
Rent from Transcat - Step 2

2. Contact Our Team of Rental Experts

  • Contact us here or click below to submit your request for a rental quote and a member of our Rental Team will review the request and will reach out to you very soon
Rent from Transcat - Step 3

3. Select Your Rental Period & Complete Your Order

  • Our weekly period lasts 7 calendar days, while our monthly rental period lasts 28 calendar days
  • Provide your form of payment, sign the rental agreement and any other required documents, and we will ship you the unit