Hioki PW6001-12

Power Analyzer 12 Channel

Order #: PW6001-12

Mfg #: PW6001-12

Questions about availability or need help? Contact Us:

(800) 633-0561
$14,995.00

Hioki PW6001-12

Power Analyzer 12 Channel

Order #: PW6001-12

Mfg #: PW6001-12

$14,995.00
Availability:
Item discontinued

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • 2 channel, motor analysis, D/A output
  • Basic accuracy of ±0.02%*1 for power measurement (*1 PW6001 accuracy only. Instrument delivers accuracy of ±0.07% even after the current sensor accuracy has been added.)
  • High noise resistance and stability (80 dB/100 kHz CMRR, ±0.01%/°C temperature characteristics)
  • Accurate measurement even when the load is characterized by large fluctuations; TrueHD 18-bit resolution
  • 10 ms data refresh while maintaining maximum accuracy (using a specially designed IC to make all measurements independently while performing simultaneous calculations.)
  • DC basic accuracy of ±0.07%, which is key for stable, accurate efficiency measurement
  • Broad frequency band and sampling that are 10 times better than those of legacy models
  • Synchronize 2 units for up to 12 channels*2 in real time *2 Two 6-channel models can be connected with an optical connection cable (over a max. length of 500 m) to enable numerical and waveform synchronization
  • Special triggers to enable waveform analysis and motor analysis without the need for an oscilloscope
  • Wideband harmonic analysis up to the 100th order with a 1.5 MHz band
  • Special Member Pricing
    Buy with Calibration
    Rental Instruments
    Access to 100,000+ products
    1,000's of instruments in stock
    Product selection expertise
    Application assistance
    Purchase with a PO

    Measurement line typeSingle-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire
    Number of input channelsMax. 6 channels; each input unit provides 1 channel for simultaneous voltage and current input
    (Voltage measurement unit: Photoisolated input, resistance voltage divider, Current measurement unit: Isolated input from current sensor)
    Measurement itemsVoltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), frequency (f), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
    Harmonic measurement: Harmonic active power, select calculation order
    from 2nd order to 100th order
    Waveform recording: Voltage and current waveforms/ Motor pulse: Always 5 MS/s
    Motor waveforms: Always 50 kS/s, 16 bits
    Recording capacity: 1 Mword × ((voltage + current) × number of channels + motor
    waveforms)
    Motor analysis (PW6001-11 to -16 only): Voltage, Torque, Rotation, Frequency, Slip, or Motor output
    Measurement rangeVoltage range: 6 to 1500 V, 8 ranges
    Current range (Probe 1) : 400 mA to 1 kA (depends on current sensor)
    Current range (Probe 2) : 100 mA to 50 kA (depends on current sensor)
    Power range: 2.40000W to 4.50000MW (depends on combination of voltage and current range)
    Frequency range: 0.1 Hz to 2 MHz
    Basic accuracyVoltage: ±0.02 % rdg. ±0.02 % f.s.
    Current: ±0.02 % rdg. ±0.02 % f.s. + current sensor accuracy
    Active power: ±0.02 % rdg. ±0.03 % f.s. + current sensor accuracy
    Synchronization frequency rangePower measurement: 0.1 Hz to 2 MHz
    Harmonic measurement: 45 Hz to 66 Hz (IEC standard mode), 0.1 Hz to 300 kHz (Wideband mode)
    Frequency bandDC, 0.1 Hz to 2 MHz
    Data update ratePower measurement: 10 ms/ 50 ms/ 200 ms
    Harmonic measurement: 200 ms (IEC standard mode), 50 ms (Wideband mode
    Data save intervalOFF, 10 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes
    User-selected from all measured values, including harmonic measured values,
    Specified measured values can be saved in internal memory or USB flash drive
    External interfacesUSB (memory), LAN, GP-IB, RS-232C, External control ,Synchronization control
    Power supply100 to 240 V AC, 50/60 Hz, 200 VA max
    Dimensions and mass430 mm (16.93 in)W × 177 mm (6.97 in)H × 450 mm (17.72 in)D, 14 kg (49.4 oz) (PW6001-16)
    AccessoriesInstruction Manual ×1, Power cord ×1, D-sub connector × 1 (PW6001-1x only)
    All products in this series