Fluke 374-VIP
Order #: 374-VIP
Mfg #: FLUKE-374
Fluke 374-VIP
Order #: 374-VIP
Mfg #: FLUKE-374
Only need this item for a short time? Learn about rentals
Overview
Be ready for anything
The Fluke 374 True RMS Clamp Meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A AC and provides increased display flexibility, and improved wire access.
Product Highlights
- FREE Ugly's Electrical Book
- FREE AC Voltage Detector
- Replaces the Fluke 334 and 335
- 600 A ac and dc current measurement with fixed Jaw
- 2500 A ac current measurement with iFlex flexible current probe (sold separately)
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement to 6000? with continuity detection
- Min, max, average and inrush recording to capture variations automatically
- 1000 µF capacitance measurement
- iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
- CAT IV 600V, CAT III 1000 V safety rating
- Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing personal protective equipment
- Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
- Three year warranty
- Soft carrying case
Each Unit Includes
- FREE Ugly's Electrical Book
- FREE AC Voltage Detector
- Coated instruction card
- Safety information sheet
- Soft carrying case
- TL75 test leads
- Two AA Alkaline batteries
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
- Fluke H3Holster for the Fluke 330 Series Clamp Meters
Order #: H3
Mfg #: 1608458
Availability:Out of stockSpecial Price $36.00 Regular Price $38.99 - Fluke TLK-225SureGrip Master Accessory Set
Order #: TLK225
Mfg #: 2097031
Availability:Out of stockSpecial Price $153.00 Regular Price $169.99
AC Current via Jaw | ||||
Range | 374 and 375 | 600.0 A | ||
376 | 999.9 A | |||
Resolution | 0.1 A | |||
Accuracy | 2% ± 5 digits (10-100 Hz) | |||
2.5% ± 5 digits (100-500 Hz) | ||||
Crest Factor (50/60 Hz) | 3 @ 500 A (375 and 376 only) | |||
2.5 @ 600 A | ||||
1.42 @1000 A (376 only) | ||||
Add 2% for C.F. > 2 | ||||
AC Current via Flexible Current Probe | ||||
Range | 2500 A | |||
Resolution | 374 and 375 | 0.1 A (≤ 600 A) | ||
1 A (≤ 2500 A) | ||||
376 | 0.1 A (≤ 999.9 A) | |||
1 A (≤ 2500 A) | ||||
Accuracy | 3% ±5 digits (5 – 500 Hz) | |||
Crest Factor (50/60Hz) | 3.0 at 1100 A (375 and 376 only) | |||
2.5 at 1400 A | ||||
1.42 at 2500 A | ||||
Add 2% for C.F. > 2 | ||||
Distance from Optimum | i2500-10 Flex | i2500-18 Flex | Error | |
A | 0.5 in (12.7 mm) | 1.4 in (35.6 mm) | ± 0.5% | |
B | 0.8 in (20.3 mm) | 2.0 in (50.8 mm) | ± 1.0% | |
C | 1.4 in (35.6 mm) | 2.5 in (63.5 mm) | ± 2.0% | |
Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range. | ||||
DC Current | ||||
Range | 374 and 375 | 600.0 A | ||
376 | 999.9 A | |||
Resolution | 0.1 A | |||
Accuracy | 2% ± 5 digits | |||
AC Voltage | ||||
Range | 374 and 375 | 600.0 V | ||
376 | 1000 V | |||
Resolution | 374 and 375 | 0.1 V | ||
376 | 0.1 V (≤ 600.0 V) | |||
1 V (≤ 1000 V) | ||||
Accuracy | 1.5% ± 5 digits (20 – 500 Hz) | |||
DC Voltage | ||||
Range | 374 and 375 | 600.0 V | ||
376 | 1000 V | |||
Resolution | 374 and 375 | 0.1 V | ||
376 | 0.1 V (≤ 600.0 V) | |||
1 V (≤ 1000 V) | ||||
Accuracy | 1% ± 5 digits | |||
mV dc | ||||
Range | 375 and 376 | 500.0 mV | ||
Resolution | 0.1 mV | |||
Accuracy | 1% ± 5 digits | |||
Frequency via Jaw | ||||
Range | 375 and 376 | 5.0 - 500.0 Hz | ||
Resolution | 0.1 Hz | |||
Accuracy | 0.5% ± 5 digits | |||
Trigger Level | 5 – 10 Hz, ≥10 A | |||
10 – 100 Hz, ≥5 A | ||||
100 – 500 Hz, ≥10 A | ||||
Frequency via Flexible Current Probe | ||||
Range | 375 and 376 | 5.0 - 500.0 Hz | ||
Resolution | 0.1 Hz | |||
Accuracy | 0.5% ± 5 digits | |||
Trigger Level | 5 – 20 Hz, ≥ 25 A | |||
20 – 100 Hz, ≥ 20 A | ||||
100 – 500 Hz, ≥ 25 A | ||||
Resistance | ||||
Range | 374 | 6000 Ω | ||
375 and 376 | 60 kΩ | |||
Resolution | 374 | 0.1 Ω (≤ 600 Ω) | ||
1 Ω (≤ 6000 Ω) | ||||
375 and 376 | 0.1 Ω (≤ 600 Ω) | |||
1 Ω (≤ 6000 Ω) | ||||
10 Ω (≤ 60 kΩ) | ||||
Accuracy | 1% ± 5 digits | |||
Capacitance | ||||
Range | 1000 μF | |||
Resolution | 0.1 μF (≤ 100 μF) | |||
1 μ F (≤ 1000 μF) | ||||
Accuracy | 1% ± 4 digits | |||
Mechanical Specifications | ||||
Size (L x W x H) | 246 mm x 83 m x 43 mm | |||
Weight | 388 g | |||
Jaw Opening | 34 mm | |||
Flexible Current Probe Diameter | 7.5 mm | |||
Flexible Current Probe Cable Length | 1.8 m | |||
(head to electronics connector) | ||||
Environmental Specifications | ||||
Operating Temperature | 10°C – +50°C | |||
Storage Temp | -40°C – +60°C | |||
Operating Humidity | Non condensing (< 10 –°C) | |||
≤ 90% RH (at 10°C – 30°C) | ||||
≤ 75% RH (at 30°C – 40°C) | ||||
≤ 45% RH (at 40°C – 50°C) | ||||
Operating Altitude | 3000 meters | |||
Storage Altitude | 12,000 meters | |||
EMC | EN 61326-1:2006 | |||
Temperature Coefficients | Add 0.1 x specified accuracy for each | |||
degree C above 28°C or below 18°C | ||||
Safety Specifications | ||||
Safety Compliance | CAN/CSA-C22.2 No. 61010-1-04 | |||
ANSI/UL 61010-1:2004 | ||||
ANSI/ISA-61010-1 (82.02.01):2004 | ||||
EN/IEC 61010-1:2001 to | ||||
1000V Measurement Category (CAT) III | ||||
600V Measurement Category (CAT) IV | ||||
Pollution Degree 2 | ||||
EN/IEC 61010-2-032:2002 | ||||
EN/IEC 61010-031:2002+A1:2008 | ||||
Batteries | 2 AA, NEDA 15A, IEC LR6 |