Hioki 3284

200 ARMS AC/DC Clamp On

Order #: 3284HK

Mfg #: 3284

Questions about availability or need help? Contact Us:

(800) 633-0561
$599.00

Hioki 3284

200 ARMS AC/DC Clamp On

Order #: 3284HK

Mfg #: 3284

$599.00
Availability: Item ships in about Ships in 2-3 weeks
Available Promotions

Choose Your Options:

Add Accredited Calibration

You have chosen to add the following Calibration Services to Your Order

Make sure your instrument is calibrated and ready to use the minute you open the box by adding our expert calibration service. Why Calibrate?

Already have this this item and need calibration? Request a calibration quote

This product is available for shipping to the United States and Puerto Rico only.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Analysis for DC and AC distorted waves
  • 200 Arms, clamp aperture: 33 mm (1.30 in) dia.
  • Inrush current crest value
  • RMS value of full-wave rectified waveforms
  • Waveform and harmonic analysis
  • AC Current range AC (RMS or Peak value): 20.00 or 200.0 A AC, 2 ranges (±1.3 % rdg. ±3 dgt. at 50 or 60Hz), AC+DC (RMS or Peak value) 20.00 or 200.0 A AC, 2 ranges (±1.3 % rdg. ±13 dgt. at 50 or 60Hz) - Effective value rectifier
  • DC Current range: DC (Average or Peak value) 20.00 or 200.0 A DC, 2 ranges (±1.3 % rdg. ±3 dgt.)
  • AC Voltage range: AC (RMS or Peak value) 30.00 to 600 V AC, 3 ranges (±1.0 % rdg. ±3 dgt. at 50 or 60Hz), AC+DC (RMS or Peak value)30.00 to 600 V AC, 3 ranges (±1.0 % rdg. ±7 dgt. at 50 or 60Hz) - Effective value rectifier
  • DC Voltage range: DC (Average or Peak value) 30.00 to 600 VDC, 3 ranges (±1.0 % rdg. ±3 dgt.)
  • Frequency: 10 to 1000 Hz
  • Mode: Max./Min./AVE./RMS Record mode/Auto-off
  • Analog output: DC, or AC 1 V/f.s.
  • Level output: with REC mode
  • Waveform output: with MON mode
  • Frequency characteristics (at AC current / voltage): DC, 10 to 2 kHz
  • Display section Current/2500 dgt. Voltage/3750 dgt. Bar graph/35 seg.
  • Sampling rate: 2 or 4 times/sec (Slow: 1 time/3 sec)
  • Crest factor (RMS) 2.5 (1.7 at 600 V range), 1.5 (200 A range)
  • Max. circuit voltage: 600 V AC rms (insulated wire)
  • Power supply: 6F22(006P) × 1 (Continuous use 25 hours) or AC adapter
  • Core jaw dia. Ø 33 mm(1.30 in)
  • Dimensions: 62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D
  • Mass: 460 g (16.2 oz)

Each Unit Includes

  • Test lead 9207-10
  • Carrying case 9399
  • Hand strap

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

All products in this series