Order #: 1004-740
Mfg #: 1004-740
Only need this item for a short time?
MIT430/2 - 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download.
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.
Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.
A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.
Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.
- Designed for Electrical and Industrial testing
- Insulation testing from 50 to 1000 V
- 2% test voltage accuracy
- Stabilized insulation test voltage
- Polarization Index (PI) and Dielectric Absorption Ratio (DAR) functions
- True RMS voltage measurement to 600 V ac or dc with resolution from 0.1 mV
- Single range, faster continuity testing from 0.01 Ω to 1 MΩ
- Frequency measurement from 15 to 450 Hz
- Capacitance measurement from 1 nF to 10 μF
- Automatically test to a time limit
- Stores over 1000 test results with onboard storage
- CAT IV 600 V / CAT III 1000 V
- IP54 rated providing a weatherproof case to reduce the chances of water ingress
- Live circuit detection and protection
- Auto reverse polarity
- PASS/FAIL indication on limit alarms
Each Unit Includes
- Red/Black Silicone test leads with Probes + Clips
- SP5 remote switch probe (not MIT400/2)
- Owners information CD
- Batteries 6 x AA Alkaline
- Hard carry case
- Megger 1004-183DC Car Charger 2.5mm Pin
Order #: 1004-183
Mfg #: 1004-183Availability: Ships in 2-3 weeks$47.00
- Megger 1002-015Fused Test Lead Set for Model CFL510G
Order #: 1002-015
Mfg #: 1002-015Availability: Ships in 2-3 weeks$215.00
- Megger 1007-157SP5 Remote Switched Probe Accessory
Order #: 1007-157
Mfg #: 1007-157Availability:Out of stock$170.00
- Megger 1007-887Test & Carry Pouch for MIT400/2 Series
Order #: 1007-887
Mfg #: 1007-887Availability: Ships in 2-3 weeks$105.00
- Megger 1002-001Replacement Lead Set for MIT200/300/400 Series
Order #: 1002-001
Mfg #: 1002-001Availability: Ships in 1-2 weeks$153.00
- Megger 1007-464Line Charger Kit (MIT420/2 & 430/2 only)
Order #: 1007-464
Mfg #: 1007-464Availability: Ships in 2-3 weeks$135.00