Order #: 942-L-VIP
Mfg #: 942-L-VIP
DISCONTINUED. The Altek 942 has been discontinued and Transcat is completely out of stock. Please see the PIE 541 for a very similar form / function replacement.
Only need this item for a short time?
- Laboratory Accurate
±0.001% of setting (10 PPM).
- Six Real World Ranges
1 to 20000 Counts-Per-Hour (CPH), 0.1 to 2000.0 Counts-Per-Minute (CPM), 0.01 to 999.99 Hz, 0.001 to 99.999 kHz and 0.01 to 250.00 kHz.
- Calibrate Totalizers
Output a selectable number of pulses over 1 to 99 minutes to verify totalizer readings. The calibrator automatically stops outputting when the selected number of pulses has been sent to the totalizer.
- Count Pulses
Use as a timed totalizer to check flowmeter and integrator outputs. Built-in totalizer to 99999 counts with optional timed operation to 99 minutes up to maximum rate of 100 Hz.
- Save Time
Calibrate flowmeters, frequency transmitters and integrators. Use CPH and CPM ranges to directly display extremely slow signals, eliminating waiting with stop watch and calculator.
- Match Your Receiver's Input
Select from sine, zero crossing square or zero based square wave output. Adjustable amplitude from 50 mV to 12 V p-p.
- Reads All Waveforms
From 40 mV to 240 V peak. Instantly recall the minimum and maximum frequency measured.
- Quik-Chek Switch
Instantly recall 18 output frequencies (three for each range). Fast, easy adjustment with a multi-speed digital potentiometer.
- Built-In Leads
Large alligator clips for easy connections. Optional BNC connector available.
- Long Battery Life
Six AA alkaline batteries last over 40 hours.