AEMC MR415
AC/DC Current Probe 400AAC 1mV/A and 600ADC,1mV/A
Order #: 1200.80
Mfg #: 1200.80
Special Price
$332.50
Regular Price
$350.00
Special Price
$332.50
Regular Price
$350.00
Availability: Ships in 1-2 weeks
Product Highlights
The MR415 is a hall effect current probe with 1 range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measures up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).
400AAC, 1mV/A & 600ADC, 1mV/A, 4mm Banana Plug Lead
- The jaw shape enables users to clamp on to cables or small busbars
- Powered by battery or standard external 5V power supply via micro-USB connector
- Measures up to 1000Aac and 1400Adc (model dependent)
- Automatic Zero DC reset function
- Auto Power Off enable/disable function
- Millivolt output compatible with most equipment and instruments
- Battery life up to 50 hours
- Safety rating 600V CATIII
Maximum Conductor Size | 1.18" (30mm) or 2 bus bar 1.24 x 0.39" (31.5 x 10mm) |
Current Range | 0.5 to 400AAC, 600ADC |
Output Signal | 1mV/A via a 5ft (1.5m) lead with 4 mm safety banana plug |
Accuracy 50/60Hz | ≤2% @ 400A |
Frequency Range | DC to 30kHz (-3dB) (depending of current value) |
Phase Shift At 50Hz | ≤1.5°@ 400A |
Load Impedance | >1MΩ and ≤100pF |
Overload | 3000ADC or 1000AAC continuous for < 1kHz |
Zero Adjust | Automatic on both ranges |
Power Supply | 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B |
Battery Life | 50H typical |
Low Battery Indication | Green LED blinking |
Overload Indication | Red LED on when measurement > than selected range |
Dimensions (H x W x D) | 8.82 x 3.82 x 1.73" (224 x 97 x 44mm) |
Weight (with Battery) | 0.98lbs (440g) |
Operating Temperature | 14° to +131°F (-10 to +55°C) |
Storage Temperature | -40° to +176°F (-40 to +80°C) |
Relative Humidity | Up to 85% @ 35°C |
Ingress Protection (Ip) | IP 40 |
EMC | EN 61326-1 |
Safety Compliance | IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III |
Related Products
- AEMC 3000-36-2-1AmpFlex Flexible Current Probe, 300/3000A, 36", 10mV/1mV/ASpecial Price $494.00 Regular Price $520.00
-
- Fluke TLK1550-RTLC Integral Test Lead & 10kV Clamp for 1550X/1555 Insulation TestersIntegral Test Lead & 10kV Clamp for 1550X/1555Special Price $382.69 Regular Price $429.99
- AEMC MF300-10-2-10HFMiniFlex Current Transformer, 30/300A, 10", 100mV/10mV/ASpecial Price $609.90 Regular Price $642.00
- AEMC 3000-24-2-1AmpFlex Flexible Current Probe, 300/3000A, 24", 10mV/1mV/ASpecial Price $470.25 Regular Price $495.00
-
-
- AEMC 3000-24-1-1AmpFlex Flexible Current Probe, 3000A, 24", 1mV/ASpecial Price $427.50 Regular Price $450.00
- AEMC 3000-48-2-1AmpFlex Flexible Current Probe, 300/3000A, 48", 10mV/1mV/ASpecial Price $522.50 Regular Price $550.00
-
-
- AEMC SR634AC Current Probe(250A-20mA/A, 500A-10mA/A,1000A-5mA/A,Jack)Special Price $293.55 Regular Price $309.00
-
-