SPM Instrument 42100

SPM Transducer w/TMU, UNC 5/16-18, max 328ft cable

Order #: 42100

Mfg #: 42100

Questions about availability or need help? Contact Us:

(800) 633-0561
$566.40

SPM Instrument 42100

SPM Transducer w/TMU, UNC 5/16-18, max 328ft cable

Order #: 42100

Mfg #: 42100

$566.40
Availability: 2-3 weeks
Available Promotions

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

The shock pulse transducer with TMU is used in permanent SPM installations for bearing monitoring, in cases where the cable length between transducer and measuring unit exceeds 4 m. This allows a cable length of max. 100 m. The transducer with TMU is installed in a countersunk mounting hole on the bearing housing, in the same way as a standard transducer.

A shock pulse transducer with TMU (TMU=Transducer Matching Unit) converts the shock pulses emitted by the bearing into an electric signal, and stabilizes the signal for transmission via a long cable. A coaxial cable connects the transducer with a measuring terminal or measuring device.

Transducer housing and base are made of stainless, acid proof steel, suitable for aggressive environments. Thread size is M8, with UNC 5/16" as an alternative.

The transducer is normally connected with a TNC plug, SPM 93022. In moist envirnments, the coaxial cable must be connected with a sealing TNC plug, SPM 13008. A TNC angle plug, SPM 93077, can be used in narrow spaces.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Technical Data
Measuring range: Max. 100 dBsv
Housing, base: Stainless acid proof steel, Sandvik Grade: 1802, EN: 1.4523
Design: Sealed
Connector tightness: IP65 with TNC connector. IP67 with conn. SPM13008
Temperature Range: -30°C to + 150°C
External Overpressure: Max. 0.7 MPa (7 bar)
Torque: 15 Nm, max. 20 Nm
Connector: TNC Jack