RTD-500 Programmable
RTD Simulator

 

The RTD-500 programmable temperature simulator is designed for performing highly accurate calibration of temperature controllers. It offers a user-friendly interface with keypad data entry. The unit is programable via RS232 computer interface.

  • Temperature range from -200 to 850°C
  • Accuracy +/- 0.02°C
  • Simple keypad operation for value selection.
  • Back-lit LCD display
  • Temperature Stability better than 1 ppm/°C
  • 2, 3 and 4 wire sensor simulation.

Specifications:

  • Resistance Range: 16 Ohms to 10,000 Ohms
  • Rated Current: 100 mA (16 – 30 Ohms)
    50 mA (30 – 100 Ohms)
    20 mA (100 – 500 Ohms)
    10 mA (500 – 3,000 Ohms)
    5 mA (3,000 – 10,000 Ohms)Temperature simulation Range: -200 – 850°CTemperature Scales: IPTS68, ITS90
  • Type of Pt Simulated Sensors: DIN, ANSI

 

 

  • Type of Ni Simulated Sensors: DIN
  • Operating Voltage: 100 – 240 VAC/50 – 60 Hz.
  • Remote Control: RS232
  • Reference Temperature: 18 – 28°C
  • Operating Temperature: 5 – 40°C
  • Storage Temperature: -10 – 50°C
  • Dimensions: W 12.8", H 4.37", D 12.4"
  • Weight: 8.8 lbs.
Sensor Simulation Accuracy
Temperature
Pt100
Pt200
PT500
Pt1000
Ni100
Ni1000
-200 – 200°C
0.02°C
0.02°C
0.02°C
0.03°C
-
-
200 – 500°C
0.03°C
0.04°C
0.06°C
0.15°C
-
-
500 – 850°C
0.04°C
0.06°C
0.15°C
0.2°C
-
-
-10 – 120°C
-
-
-
-
0.02°C
0.1°C

 
Accuracy of Resistance
Range
% of Value
16 – 400 Ohms
0.003% +/- 3 mOhms
400 – 2,000 Ohms
0.005%
2,000 – 10,000 Ohms
0.015%

 


A division of Prime Technologies, LLP

 

Content was provided by Prime Technologies.
 
To view the current Transcat Web Specials, CLICK HERE.

To search through our wide selection of test and measurement products in our online catalog, please CLICK HERE.

To subscribe to this FREE Transcat e-Newsletter, CLICK HERE

You are receiving this mailing because you registered to receive special offers from Transcat. If you would prefer not to receive future e-Newsletter messages from Transcat, please CLICK HERE.
© 2006 ALL RIGHTS RESERVED