0 Item(s)

Starrett 51217

Height Transfer Gage 0-48" Range

Order #: 252Z-48

Mfg Part #: 51217

$2,806.00 USD
 
 

Usually ships in 7-10 days

Free shipping over $250

Add Items to Cart

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Starrett Products

Overview :

Product Highlights

  • Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
  • Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
  • Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
  • Hand-fitting base design for sure-grip handling and easy movement
  • Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
  • Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
  • Thumb screw allows slide to be locked
  • Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
  • A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
  • The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
  • Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod