0 Item(s)

Newport Electronics INFS-0000-DC1

INFINITY Strain Gage Meter 115VAC

Order #: INFS-0000-DC1

Mfg Part #: INFS-0000-DC1

$580.00 USD
 
 

Usually ships in 7-10 days

Free shipping over $250

Add Items to Cart

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Newport Electronics Products

Overview :

Product Highlights

  • 6 Digits
  • Optional Split Meter System
  • Four Isolated Open Collector Outputs
  • Wide Selection of dc Voltage and Current Ranges
  • Ratiometric Inputs
  • Tare
  • 1.5 to 11 and 24 Vdc Sensor Excitation
  • Peak and Valley Detection and Memory
  • Large Digital Offset Capabilities Enabling Easy Scaling in Engineering Units
  • Smart Filtering Detects the Difference Between a Spike or Process Change (Patent Applied For)
  • Selectable Decimal Point and Read Rates of up to 13 Readings/Sec
  • Configurable Via Front Pushbuttons or Via RS-232 or RS-485
  • Accuracy: ±0.005% rdg
  • Span Temperature Coefficient: ±15 ppm/°C
  • Step Response: 1 sec to 9.9%
  • Warm-up to Rated Accuracy: 50 min
  • Operating Ambient: 0 to 50°C (32 to 122°F), 95%RH, non-condensing
  • Storage Ambient: -40 to 85°C (-40 to 185°F)
  • Power: 115 or 230 Vac, 49-400 Hz; 10 to 32 Vdc
  • Power Consumption: 6 W nominal, 10 W max.
  • Normal Mode Rejection: 60 dB
  • Common Mode Rejection: 120 dB
  • Common Mode Voltage: 1500 V peak per Hv test
  • Conversion: dual-slope technique
  • Resolution: 15-bit
  • Reading Rate: 3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz
  • Display: red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators
  • Dimensions: 48 H x 96 W x 165 D mm (1.89" x 3.78" x 6.5")
  • Panel Cutout: 45 H x 92 W mm (1.772" x 3.622"); 1/8 DIN
  • Weight: 574 g (1.27 lb)
  • TTL Outputs: four, isolated open collector; rated 150 mA at 1 V sink, 30 V open
  • BCD Output: isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated
  • Dual Relays: form C, 7 A at 30 Vdc or 230 Vac
  • Four Relay Option: dual 7A relays and dual 1 A relays
  • Analog Output: 0-5 V/1-5 V/0-10 V/0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 14-bit resolution; 0.1% accuracy, 50 msec step response
  • RS-232 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit current display, alarm status, min/max, actual measured input value and status
  • RS-485 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199
  • Voltage Input Ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50
  • Current Input Ranges: 0-20 mA, 4-20 mA
  • Input Configuration: single-ended
  • Polarity: unipolar/bipolar, programmable
  • Span Adjustment: +0.00001 to 500,000, programmable
  • Offset Adjustment: 0 to 999,999 or 0 to -99,999; programmable
  • Sensor Excitation: 10 V at 30 mA for bridge; 24 V at 25 mA for loop power

Accessories :