0 Item(s)

MW100 Main Module & Quick Start System, 100VAC-240VAC, 3-Pin

MW100 Main Module & Quick Start System, 100VAC-240VAC, 3-Pin

The MW100 is a scalable, high performance data acquisition/data-logging platform designed for both PC-controlled and stand-alone operation under harsh operating conditions. Open ethernet connectivity with web-based configuration and data monitoring functions allow MW100 to handle a wide range of monitoring and historical logging functions. See real time trends with your web browser from any PC and no special software. A full range of input/output modules handle all of your process inputs with fast measurement speed and high noise immunity for rock-solid performance.

Order #: MW100-E-1D/M1

Mfg Part #: MW100-E-1D/M1

Call for Price


This product is currently not available.

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

Discontinued Product

Overview :

Product Highlights

  • In a wide range of temperatures: -20 to 60° 1,2,3,4
  • Reinforced insulation: Between input terminal and case 53700 Vrms (one minute) or 600 Vrms/VDC (continuous)
  • A wide variety of network functions: HTTP, FTP, DHCP, SNTP, E-mail, and others
  • DC power supply (12 V-28 V) option available
  • High speed measurement with a single unit (10 channels/10 ms or 60 channels/100 ms): Shortest measurement interval of 10 ms
  • Multi-interval: Enables mixing of three different measurement intervals in a single unit (measurement intervals can be set for each module)
  • Supports CompactFlash (CF) cards6 of up to 2 GB
  • Continuous data acquisition is possible on 60 channels at 100 ms for approximately ten days with a 2-GB card, or for three months on 60 channels at 1 s.
  • MATH function on the main module available with the /M1 option.
  • Collective data acquisition on 360 channels (via Modbus with the /M1 option)
System Configuration Standard Configuration N Mw100 04 A custom MW100 measuring system is comprised of three elements; the MW100 main module, MX Series input/output modules, and MX150 Series base plate. The system can be bench mounted as-is or DIN rail mounted for rack or panel installations. A DIN rail-mounting bracket is included with the MX150. The input/output modules, base plate, and accessories are all the same as those for the MX100 DAQMASTER series (AC adapter is for the MW100 only).