0 Item(s)

Meriam M100-DN0028

Manometer,0-28"H2O,.25%FS Differential

Order #: M100-DN0028

Mfg Part #: M100-DN0028

$512.00 USD

This product is currently not available.

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Meriam Products

Compare Products in this Series

Meriam M100-GN0100 Meriam M100-GN0100

Digital Manometer,0-100PSIG +/-0.25%FS

Order #: M100-GN0100

Usually ships in 7-10 days

$475.00 USD
Add Items to Cart Add to Quote

Meriam M100-AN1551 Meriam M100-AN1551

Digital Manometer,+/-0.25%FS 0-1551mmHG Absolute

Order #: M100-AN1551

Usually ships in 7-10 days

$476.00 USD
Add Items to Cart Add to Quote

Overview :

Product Highlights

  • Engineering Units: Inches of H2O at 20° C, mm of H2O at 20°C, mm of Hg at 0°C, Inches of Hg at 0°C, kPa, mBar, Bar, PSI and user selectable
  • Media Compatibility: Non-isolated sensor for clean, dry, non-corrosive gases
  • Pressure Limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less.
  • Pressire Limits: (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less
  • Accuracy: No temperature effect over the entire operating range 14F° to 122°F (-10C° to +50°C)
  • Min/Max: Displays the MIN and MAX pressures
  • Hold: Freezes the pressure measurement on the display, however, the bar graph is still active
  • Average: Displays a continuous filtered average of the pressure measurements
  • Temperature: Displays the internal ambient temperature of the M1 in °C or ° F
  • Record Mode: Can store up to 240 pressure measurements; Automatic – the current value is automatically stored every 5 seconds, for up to 20 minutes; Manual – the current value is stored every time the Units key is pressed, up to 240 times
  • Backlight: A green backlight is user activated via the backlight key. A red backlight is automatically activated during an error/over range condition
  • Auto Shutoff: To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity
  • Field Recalibration: M1 can be calibrated in the field for zero and span
  • Low Battery Indication: BAT icon is displayed when batteries require replacement. Approximately 2 hours of run time is provided on a low battery condition
  • Bar Graph: Horizontal bar for full scale pressure reference (0-100%)

Accessories :