- The minimum value holding function provides the easy of detection of hole diameter.
- An analog bar indicator is integrated to enhance the intuition in reading.
- GO/±NG judgment is performed by setting the upper and lower tolerances.
- Up to three sets of master value and upper/lower tolerance value can be memorized.
- Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
- Resolution.00001in 0.001mm
- Range .5in 12.7mm
- Accuracy .00012in
- ANSI/AGD type Stem dia 3/8 in 4-48 UNF Thread