0 Item(s)

Hioki 3332

Power HiTester, Single-phase / two-wire

Order #: 3332

Mfg Part #: 3332

$2,835.00 USD
 
 

This product is currently not available.

View the Recommended Alternative Product

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Hioki Products Discontinued Product

Overview :

Product Highlights

  • Ultra high-sensitive measurement, for use to measure an effective power of equipment in stand-by mode: Current 1.0000 mA full-scale, 0.1 µA resolution
  • Wide measurement range, up to 50.000 A direct input
  • Measurement lines Single-phase/two-wire
  • Measurement items Voltage, Current, Current peak, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Power integration, Current integration
  • Measurement ranges Voltage: 15.000 V to 600.00 V, 6 ranges, Current: 1.0000 mA to 50.000 A, 15 ranges, Power: 15.000 mW to 30.000 kW, 90 ranges, Frequency: 1 Hz to 100 kHz, auto or 2 ranges
  • Integration range 0 to ±999999 MAh/MWh, (integration time up to 10000 hours)
  • Wave peak measurement Current (displays maximum absolute value)
  • Basic accuracy ±0.1 % rdg. ±0.1 % f.s. (active power, at 45 to 66 Hz)
  • Frequency characteristics 1 Hz to 100 kHz (1 Hz to 100 kHz at 20 A or less, 1 Hz to 10 kHz at 20 A to 30 A, 50/60 Hz at 30 A to 50 A )
  • Signal output Analog level: Voltage, current, active power, 5 V DC f.s., Waveform monitor: Voltage, current, 1 V rms f.s.
  • Other functions Comparator function for 2 items Scaling function (PT/CT/SC), Displays a moving average function, GP-IB/RS-232C interface
  • Sampling rate 5 times/second
  • Power supply 100 to 240 V AC, 50/60 Hz
  • Dimensions, mass 210 mm(8.27 in)W × 100 mm(3.94 in)H × 261 mm(10.28 in)D, 2.5 kg (88.2 oz)

Each Unit Includes

  • Power cord
  • Connector for EXT I/O

Accessories :