0 Item(s)

Fluke Deadweight Testers

Fluke Deadweight Testers

Fluke deadweight testers are unmatched in quality and reliability. With over 50 years in perfecting high-performance pressure standards and test equipment, Fluke deadweight testers (DWTs) and Fluke pressure calibration tools provide the peace of mind you get from working with the very best.

Deadweight testers are primary standards for pressure measurements and are thus suited for calibration and accuracy testing of pressure gauges. Deadweight testers are excellent pressure calibration instruments because they source their own pressure, are reliably accurate, and retain their accuracy at each reading point. Their drawbacks are weight, the need for adjustment to local gravity and setup complexity.

Which Fluke Deadweight Tester Do I Need?

 

It’s obvious that the unit you choose should be able to handle your upper pressure range, but it’s a good idea to consider the lower end of your range, as deadweight testers are generally less accurate at pressures less than 10% of the total range. Medium choice is generally dictated by the range, with pneumatic and gas units preferred for lower pressures, and water or oil preferred for higher pressures. Beyond that, the choice depends wholly on your specific application and needs.

 

    • P3000 Pneumatic Deadweight Testers — The P3000 series offers both dual vacuum/pressure models and liquid-lubricated, gas-operated models. Accurate to within 0.015% of reading, these deadweight testers are available with ceramic or tungsten carbide pistons, martensitic steel or tungsten carbide cylinders, and a 11 ppm/ °C or 16.5 ppm/°C, depending upon the model. The P3000 series can accurately measure pressure from a vacuum to 2,000 psi (140 bar).

 

    • P3100 Hydraulic Deadweight Testers — The P3100 Series Hydraulic Deadweight Testers are oil-operated, available in single and dual piston configurations for a broader operating range, and feature a built-in priming pump, piston flotation indicators, and a screw press for fine-tuning. With +/- 0.015% accuracy, these deadweight testers feature pistons made of tungsten carbide with nickel binder, hardened martensitic steel or tungsten carbide cylinders, and 11 or 16 ppm/°C thermal expansion coefficients. The 3100 series can accurately measure pressure up to 20,000 psi (1400 bar).

 

    • P3200 Hydraulic Deadweight Testers — The P3200 series are water-operated testers, and are available in single or dual piston formats. With the same impressive features and specifications as the 3100 series, the 3200 series is built to accurately measure pressures up to 10,000 psi (700 bar).

 

    • P3800 Hydraulic Deadweight Testers — The P3800 series is engineered for high pressure, accurately measuring up to 60,000 psi (4000 bar). These testers are accurate to within 0.02% of reading standard, but 0.015% accuracy is available as an option. These testers operate using dioctyl sebacate, and feature tungsten carbide/nickel pistons and tungsten carbide/cobalt cylinders with a thermal coefficient of expansion of 11 ppm/°C.

 

 

Transcat Carries an Unbeatable Selection of Fluke Deadweight Testers

 

    • We offer more Fluke test tools than anyone else, and our prices can’t be beat. Many of our products are available for same-day shipping.

 

    • Our deadweight calibration services are world-class. When you buy a Fluke tool with calibration, our accredited labs will ensure that your device performs optimally from day one. This is especially important with deadweight testers, which inherently carry several sources of potential error.

 

    • We are committed to serving our customers. Our highly trained experts are available by phone, email, or live chat to answer your questions or set you up with the perfect deadweight tester for your application and budget.

 

 

Learn More About Fluke DWTs Today

 

For more information on Fluke deadweight testers, please use our Live Chat system, which is located on the right side of the page, our Request a Quote form, or call Transcat directly at 800-828-1470.

 

Read More

Compare up to 5 Items

You have no items to compare.

List Grid

Items 1-25 of 59

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  1. Fluke - Pressurements P3113-BAR

    Oil Operated Deadweight Tester, 350Bar

    Order #: P3113-BAR

    Mfg #: P3113-BAR

    Usually ships in 7-10 days

    $8,810.00 USD
  2. Fluke - Pressurements P3116-BAR

    Oil Operated Deadweight Tester, 1400Bar

    Order #: P3116-BAR

    Mfg #: P3116-BAR

    Usually ships in 7-10 days

    $13,100.00 USD
  3. Fluke - Pressurements P3124-BAR

    Oil Operated Dual Range Deadweight Tester, 700Bar

    Order #: P3124-BAR

    Mfg #: P3124-BAR

    Usually ships in 7-10 days

    $12,100.00 USD
  4. Fluke - Pressurements P3114-PSI

    Oil Operated Deadweight Tester, 10,000Psi

    Order #: P3114-PSI

    Mfg #: P3114-PSI

    Usually ships in 7-10 days

    $8,810.00 USD
  5. Fluke - Pressurements P3012-MBAR-P

    Gas Operated Deadweight Tester 1000Mbar with Pump

    Order #: P3012-MBAR-P

    Mfg #: P3012-MBAR-P

    Usually ships in 7-10 days

    $9,560.00 USD
  6. Fluke - Pressurements P3112-BAR

    Oil Operated Deadweight Tester, 140Bar

    Order #: P3112-BAR

    Mfg #: P3112-BAR

    Usually ships in 7-10 days

    $9,470.00 USD
  7. Fluke - Pressurements P3011-INHG-P

    Vacuum Deadweight Tester, -30"Hg with Pump

    Order #: P3011-INHG-P

    Mfg #: P3011-INHG-P

    Usually ships in 7-10 days

    $11,000.00 USD
  8. Fluke - Pressurements P3012-INH2O-P

    Gas Operated Pneumatic Deadweig 400"H2O with Pump

    Order #: P3012-INH2O-P

    Mfg #: P3012-INH2O-P

    Usually ships in 7-10 days

    $9,560.00 USD
  9. Fluke - Pressurements P3013-INH2O-P

    Gas Operated Deadweight Tester 800" H2O with Pump

    Order #: P3013-INH2O-P

    Mfg #: P3013-INH2O-P

    Usually ships in 7-10 days

    $9,560.00 USD
  10. Fluke - Pressurements P3014-BAR-P

    Gas Operated Deadweight Tester 10Bar with Pump

    Order #: P3014-BAR-P

    Mfg #: P3014-BAR-P

    Usually ships in 7-10 days

    $9,560.00 USD
  11. Fluke - Pressurements P3014-PSI-P

    Gas Operated Deadweight Tester 150Psi with Pump

    Order #: P3014-PSI-P

    Mfg #: P3014-PSI-P

    Usually ships in 7-10 days

    $9,560.00 USD
  12. Fluke - Pressurements P3015-BAR

    Gas Operated Deadweight Tester 35 Bar, No Pump

    Order #: P3015-BAR

    Mfg #: P3015-BAR

    Usually ships in 7-10 days

    $10,200.00 USD
  13. Fluke - Pressurements P3015-KPA

    Gas Operated Deadweight Tester 3500Kpa, No Pump

    Order #: P3015-KPA

    Mfg #: P3015-KPA

    Usually ships in 7-10 days

    $10,200.00 USD
  14. Fluke - Pressurements P3015-PSI

    Gas Operated Deadweight Tester 500Psi, No Pump

    Order #: P3015-PSI

    Mfg #: P3015-PSI

    Usually ships in 7-10 days

    $10,200.00 USD
  15. Fluke - Pressurements P3015-PSI-P

    Gas Operated Deadweight Tester 500Psi with Pump

    Order #: P3015-PSI-P

    Mfg #: P3015-PSI-P

    Usually ships in 7-10 days

    $11,000.00 USD
  16. Fluke - Pressurements P3022-INH2O

    Gas Operated Dual Vac/Pressure DWT, 400"H2O, No Pump

    Order #: P3022-INH2O

    Mfg #: P3022-INH2O

    Usually ships in 7-10 days

    $14,000.00 USD
  17. Fluke - Pressurements P3022-MBAR

    Gas Operated Dual Vac/Pressure Deadweight Tester, 1000Mbar, No

    Order #: P3022-MBAR

    Mfg #: P3022-MBAR

    Usually ships in 7-10 days

    $14,000.00 USD
  18. Fluke - Pressurements P3025-BAR-P

    Gas Operated Dual Vac/Pressure Deadweight Tester, 35Bar with P

    Order #: P3025-BAR-P

    Mfg #: P3025-BAR-P

    Usually ships in 7-10 days

    $15,600.00 USD
  19. Fluke - Pressurements P3025-PSI

    Gas Operated Dual Vac/Pressure DWS, 500Psi, No Pump

    Order #: P3025-PSI

    Mfg #: P3025-PSI

    Usually ships in 7-10 days

    $14,800.00 USD
  20. Fluke - Pressurements P3025-PSI-P

    Gas Operated Dual Vac/Pressure Deadweight Tester,500Psi w/Pump

    Order #: P3025-PSI-P

    Mfg #: P3025-PSI-P

    Usually ships in 7-10 days

    $15,600.00 USD
  21. Fluke - Pressurements P3031-BAR

    Liquid Lubricated Gas Operated, Deadweight Tester, 70Bar

    Order #: P3031-BAR

    Mfg #: P3031-BAR

    Usually ships in 7-10 days

    $11,300.00 USD
  22. Fluke - Pressurements P3031-KPA

    Gas Operated Deadweight Tester, 7000Kpa, Liquid Lubricated

    Order #: P3031-KPA

    Mfg #: P3031-KPA

    Usually ships in 7-10 days

    $11,300.00 USD
  23. Fluke - Pressurements P3031-PSI

    Gas Operated Deadweight Tester, 1000Psi, Liquid Lubricated

    Order #: P3031-PSI

    Mfg #: P3031-PSI

    Usually ships in 7-10 days

    $11,300.00 USD
  24. Fluke - Pressurements P3032-BAR

    Gas Operated Deadweight Tester, 140Bar, Liquid Lubricated

    Order #: P3032-BAR

    Mfg #: P3032-BAR

    Usually ships in 7-10 days

    $11,300.00 USD
  25. Fluke - Pressurements P3032-PSI

    Gas Operated Deadweight Tester, 2000Psi, Liquid Lubricated

    Order #: P3032-PSI

    Mfg #: P3032-PSI

    Usually ships in 7-10 days

    $11,300.00 USD

List Grid

Items 1-25 of 59

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3