0 Item(s)

Dwyer Instruments RMB-55-NIST

RateMaster Flowmeter,5"Scale, 40-400SCFH Air w/NIST Cert.

Order #: RMB-55-NIST

Mfg Part #: RMB-55-NIST

$260.50 USD

$252.69 USD

 
 

Usually ships in 7-10 days

Free shipping over $250

Add Items to Cart

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Dwyer Instruments Products

Overview :

Product Highlights

  • Easy to read design - The direct reading scales eliminate troublesome conversions.
  • Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore.
  • The float is highly visible against a white background.
  • Construction assures accuracy - All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin.
  • The result is accurate and repeatable readings.
  • The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque.
  • Precision metering valves of brass or stainless steel (specify BV or SSV on order) are available as an optional extra and permit precise flow adjustments.
  • For vacuum applications, Model RMA units are available with top mounted valves (specify TMV in the model number).
  • Installation is simple - The Rate-Master® flowmeter can e neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone.
  • When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout.
  • Surface mounted units can also be held in place by the piping.
  • All mounting hardware plus installation and operating instructions are included.
  • Easy-to-Interchange bodies - Within a given Series Rate-Master® flowmeter bodies can be instantly interchanged.
  • Simply "unplug" the body from backbone and replace it with another.
  • O-rings provide a tight seal on inlet and outlet.
  • Piping remains undisturbed.
  • Interchangeability is useful where different scale ranges are sometimes required at the same location in the laboratory or plant.
  • Cleaning is easy - To release the plastic flowmeter body from the stainless steel backbone, just remove four screws.
  • Pipe thread flow connections remain undisturbed.
  • Remove the slide cover and the plug ball stop, clean the flow tube with soap and water and reassemble. It’s that simple.

Accessories :