0 Item(s)

Dwyer Instruments DT1160

Detector and Standard Actuator high strength,.5" sensing dist.

The Series DT Detector Position Sensors are reliable, magnetically actuated, SS, completely interchangeable with competitive units. AC or DC for user friendly operation. They have no moving parts, eliminate costly seal fittings and offer enhanced reliability by eliminating arcing. Unintentional actuation by metals is not a problem. The sensor consists of a durable hermetically sealed reed switch potted in a SS housing and a separate 316 SS magnetic actuator bolt. As the actuator moves within the sensing range of the sensor, the magnet in the actuator changes the state of reed switch contacts inside the sensor. This either opens or closes a circuit depending on wiring configuration. Sensing distance is 0.1" (2.54 mm) for the standard target. Greater sensitivity of a larger magnetic target increases the sensing distance to 0.5" (12.7 mm).

Order #: DT1160

Mfg Part #: DT1160

$176.00 USD

$170.72 USD


Ships in 2-3 weeks

Free shipping over $250

Add Items to Cart

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Dwyer Instruments Products

Compare Products in this Series

Dwyer Instruments DT1060 Dwyer Instruments DT1060

Detector and Standard Actuator 0.1" sensing distance

Order #: DT1060

Ships in 1-2 weeks

$168.00 USD

$162.96 USD

Add Items to Cart Add to Quote

Overview :

The detector is excellent for hazardous and corrosive environments, solid state and intrinsically safe applications. A detector may be mounted in any position. For installation in hazardous locations, be sure to check local and national electrical codes. The detector is designed to NEMA 1, 3, 4, 4X, 6, 7, 9, 12 and 13.

Product Highlights

  • Detector and high strength actuator
  • 0.5" (12.7 mm) sensing distance