Fluke Industrial Calibrator Selection Guide

 

Fluke Calibration 9011A temperature calibrator, often called a thermometer calibrator, is used to remove inaccuracies in installed thermometers and temperature sensors, because temperature measurement is a critical parameter in many industrial processes. Although simulators are sometimes called temperature calibrators or thermometer calibrators and may be used to provide calibration for the electronics in an installed system, a temperature source with a calibrated reference sensor is still required to provide a complete and meaningful calibration.

The Fluke Industrial Calibrator Selection Guide below can help you select the right product for your calibration requirements. Click the Model number to get product details or a quote.

 

 Field Metrology Well thermometer calibrators
Model Range Accuracy Description/Features
9142 –25 °C to 150 °C ± 0.2 °C Light-weight portable and fast
Reads and documents °C, mV, W, and 4-20 mA
24 volt loop power
Includes accredited certificate of calibration
9143 33 °C to 350 °C ± 0.2 °C
9144 50 °C to 660 °C ± 0.35 °C at 50 °C
± 0.35 °C at 420 °C
± 0.5 °C at 660 °C
9190A –95 °C to 140 °C Accuracy: ± 0.2 °C Horizontal thermocouple furnace.  Flexible configuration for calibrating thermocouple bundles, spools, and sheathed thermocouples.
 
Micro-Bath thermometer calibrators 
Model  Range  Accuracy  Description/Features 
6102 Micro-Bath  35 °C to 200 °C 
95 °F to 392 °F 
±0.25 °C  World’s smallest calibration bath. Stability to ±0.02 °C. Stirred 2.5-inch-diameter tank. 
7102 Micro-Bath  –5 °C to 125 °C 
23 °F to 257 °F 
±0.25 °C  Portable bath to –5 °C. No refrigeration—solid-state cooling. Stability to ±0.015 °C. 
7103 Micro-Bath  –30 °C to 125 °C 
–22 °F to 257 °F 
±0.25 °C  Ultracold Micro-Bath reaches –30 °C. No refrigeration or external cooling needed. Stability to ±0.03 °C. 
 
Handheld dry-well thermometer calibrators
Model  Range  Accuracy  Description/Features 
9100S Handheld Dry-Well  35 °C to 375 °C 
95 °F to 707 °F 
±0.25 °C at 100 °C 
±0.5 °C at 375 °C 
World’s smallest dry-well. Fixed block with 4-inch well depth. Four hole patterns available. 
9102S Handheld Dry-Well  –10 °C to 122 °C 
14 °F to 252 °F 
±0.25 °C  Handheld unit cools to –10 °C. Two 0.5-inch-diameter, removable sleeves. 
 
Field dry-well thermometer calibrators
Model  Range  Accuracy  Description/Features 
9009 Dual-Block Calibrator  –15 °C to 350 °C 
5 °F to 662 °F 
Cold block: ±0.2 °C 
Hot block: ±0.6 °C 
Dual-block industrial dry-well. Each block has two wells with removable sleeves. Water- and air-tight enclosure. 
9103 Field Dry-Well  –25 °C to 140 °C 
–13 °F to 284 °F 
±0.25 °C  Small, lightweight field calibrator reaches –25 °C. Stability to ±0.02 °C. Calibrates up to six probes at once. 
9140 Field Dry-Well  35 °C to 350 °C 
95 °F to 662 °F 
±0.5 °C  Portable field calibrator. Choose from four multi-hole, removable inserts. 
3125 Surface Calibrator  35 °C to 400 °C 
95 °F to 752 °F 
±0.5 °C to 200 °C
±1.0 °C to 400 °C 
Calibrates surface sensors. Plate stability of ±0.3 °C. 
 
Precision Infrared Calibrators
Model  Range  Accuracy  Description/Features 
4180 –15 °C to 120 °C ± 0.40 °C at –15 °C
± 0.40 °C at 0 °C
± 0.50 °C at 50 °C
± 0.50 °C at 100 °C
± 0.55 °C at 120 °C
Fast, portable and easy to useCorrect target size for most thermometers
Calibration solutions from –15 °C to 500 °C (5 °F to 932 °F)
Radiometrically calibrated for traceable and consistent results
4181 35 °C to 500 °C ± 0.35 °C at 35 °C
± 0.50 °C at 100 °C
± 0.70 °C at 200 °C
± 1.20 °C at 350 °C
± 1.60 °C at 500 °C
Model  Range  Accuracy  Description/Features 
9132  50 °C to 500 °C 
122 °F to 932 °F 
±0.5 °C at 100 °C 
±0.8 °C at 500 °C 
Certifies most handheld pyrometers. Short heating and cooling times. 
9133  –30 °C to 150 °C  
–22 °F to 302 °F 
±0.4 °C  Calibrates at cold temperatures. Gets to desired temperature quickly. 
 
Metrology  Well high accuracy temperature and thermometer calibrators
Model  Range  Accuracy  Description/Features 
9170  –45 °C to 140 °C 
–49 °F to 284 °F 
±0.1 °C  Best-performing industrial heat sources (accuracy, stability, uniformity) in the world. Immersion depth to 203 mm (8 in). Optional ITS-90 reference input reads PRTs to ±0.006 °C. Temperature range from –45 °C to 700 °C. 
9171  –30 °C to 155 °C 
–22 °F to 311 °F 
±0.1 °C 
9172  35 °C to 425 °C 
95 °F to 797 °F 
±0.1 °C at 100 °C 
±0.15 °C at 225 °C 
±0.2 °C at 425 °C 
9173  50 °C to 700 °C 
122 °F to 1292 °F 
±0.2 °C at 425 °C 
±0.25 °C at 660 °C 
 
Zero point dry-well 
Model  Range  Stability  Description/Features 
9101  0 °C 
32 °F 
±0.05 °C  Solid-state cooling. Replaces messy ice baths—easy to operate. Three wells, each 6 inches deep. 
 
Dual block dry-well 
Model  Range  Stability  Description/Features 
9011 Hot Block 50 °C to 670 °C 
122 °F to 1238 °F 
±0.15 °C at 100 °C 
±0.65 °C at 600 °C 
Combined ranges from –30 °C to 670 °C. 1 unit – 2 blocks. Two independent temperature controllers (hot and cold side). Stability: ±0.01 °C. Multi-hole inserts hold up to 8 probes at once. 
9011 Cold Block  –30 °C to 140 °C 
–22 °F to 284 °F 
±0.25 °C (insert wells) 
±0.65 °c (fixed wells) 
 
Furnaces 
Model  Range  Stability  Description/Features 
9150 Thermocouple Furnace 150 °C to 1200 °C 
302 °F to 2192 °F 
±0.5 °C  Benchtop thermocouple furnace. Interchangeable insert sleeves. Fast heating and cooling. 
9118A Thermocouple Calibration Furnace 300 °C to 1200 °C ± 0.2 °C (without block)
± 0.1 °C (with block)
Horizontal thermocouple furnace.  Flexible configuration for calibrating thermocouple bundles, spools, and sheathed thermocouples.