0 Item(s)

Hioki 3197-01/5000 PRO

Power Quality Analyzer Kit (Custom 5000A Kit)

Order #: 3197-01/5000 PRO

Mfg Part #: 3197-01/5000 PRO

$3,995.00 USD
 
 

Ships in 1-2 weeks

Free shipping over $250

New Purchase Calibration Learn More

Save time and money by calibrating your new instrument before it leaves our warehouse, ensuring it arrives ready to be put into service. Find out how.

Add a Calibration to Your Item

Add Items to Cart

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Hioki Products

Overview :

Product Highlights

Power Quality Analyzer (Custom 5000A Kit)

The most comprehensive portable PQA on the market
Catch power quality problems on the fly, before they catch you!

  • Monitor for: Inrush current, Voltage swell, Voltage dips, Transient over-voltage, Interruptions
  • Measure and record: Power and Power factor, Active/Reactive energy, Demand, Load changes (with graph display), Voltage and current

For checking the wiring map and vectors in a single window
Use the wiring map, vector map and data monitor to check for proper wiring before taking measurements. Don't miss out on important power data just because of minor wiring mistakes!

With QuickSet, all you have to do is just Set, Clamp and Measure!
Let QuickSet help you take care of all the time-consuming setup procedures. All you need to do is select your circuit, clamp sensor and range, and then let QuickSet do the rest of the work for you.

Measure all the necessary power parameters simultaneously
Check for sudden inrush during motor startup and diagnose breaker trips due to over current all on the same measurement interface. View RMS data for every half cycle over a 30 second period on a large graph display

Two Integrated Programs for Data Download and Viewing
Standard USB connection lets you download data at a snap, and immediately view your measurements with the DataViewer

6 Hours of Continuous Use on a Single Recharge
Non-volatile Ni-MH rechargeable battery pack keeps important measurement data in memory even after power is turned off.

  • Features vector multimeter, QuickSet, power and power quality, bundled PC application software, compact design makes for long battery life
  • Monitor for inrush current, voltage swell, voltage dips, transient over-voltage, interruptions
  • Measure and record power and power factor, active/reactive energy, demand, load changes (with graph display), voltage and current
  • Measure power and power quality on single to three-phase circuits quickly and effortlessly

Each Unit Includes

  • 3197
  • 3ea. 9667 5000 CT
  • 9438-03 Voltage Leads
  • 9418-15 AC Adapter/Battery Charger
  • 9459 Rechargeable Battery Pack
  • USB Cable
  • 9624-50 Professional PC Software with Report Writer
  • USB Communicator Software
  • Hard Carrying Case
  • 2 Year Warranty

Specifications :

Basic specifications
Measurement lines Single-phase/two-wires, Single-phase/three-wires, Three-phase/three-wires, Three-phase/four-wires
Measurement line frequency Auto-detect (50Hz/60Hz)
Voltage range 600.0V AC
Current ranges Manually switch-able from 2 range sets according to Clamp sensor
500.0mA / 5.000A/ 50.00A / 10.00A / 100.0A / 500.0A / 1.000kA / 5.000 kA
Measurement items Impulsive voltage quality: Transient overvoltage (Impulse),
RMS voltage quality: Voltage swell, Voltage dips, Voltage interruption,
Power quality: Frequency, Voltage, Current, Current peak, Active/Reactive/Apparent power, Power factor (displaced power factor),
Three phase quality: Voltage unbalance ratio, Current unbalance ratio,
Harmonic quality: (Up to 50th order) Harmonic voltage, Harmonic current, Harmonic power, Harmonic voltage/current phase angle, Total harmonic voltage distortion, Total harmonic current distortion (THD-F, THD-R),
Interval settings AUTO / 1 / 5 / 10 / 15 / 30 / 60 minutes
Maximum record-able period 125 Days with internal non-volatile memory of 4MB-stored data will not be deleted upon power OFF; partition memory into 4 segments for maximum 31 days of recording each
Internal memory 4 MB
PC Interface USB Ver.2.0
Power supply 9418-15 AC ADAPTER or 9459 BATTERY PACK
Dimensions, mass 128W × 246 H × 63 D mm, 1.2 kg with battery pack
Accessories Voltage cords 9438-05 (1set), BATTERY PACK 9459 (1), AC ADAPTER 9418-15 (1), USB Cable (1), Basic PC Software CD-R (1), Carrying Case (1), Strap (1)
Measurement Specifications (Guaranteed Accuracy Period: 1 Year)
RMS Voltage and Current True RMS (200 ms calculation )
Voltage Accuracy ±0.3% rdg. ±0.2%f.s
Current Accuracy ±0.3% rdg. ±0.2%f.s. + Clamp sensor accuracy
Voltage (1/2) RMS Measurement True RMS (one cycle calculation refreshed every half cycle)
Accuracy ±0.3% rdg. ±0.2%f.s.
Current (1/2) RMS Measurement True RMS (half-cycle calculation, half-cycle voltage synchronized)
Accuracy ±0.3% rdg. ±0.2%f.s. + Clamp sensor accuracy
Frequency Effective Measurement range: 45.00 to 66.00 Hz
Accuracy ±0.01 Hz ±1 dgt. (when input is at least 10% of range)
Active Power Accuracy (for consumption and regeneration) ±0.3% rdg. ±0.2% f.s. + clamp-on sensor accuracy (P.F.=1)
Reactive Power Accuracy (for lags and leads) ±1 dgt. of calculation from each measurement value
Effect of Power Factor ±1.0% rdg. (50 /60Hz, P.F.=0.5)
Apparent Power Accuracy ±1 dgt. of calculation from each measurement value
Power Factor and Displacement Power Factor Accuracy (leading phase indicated) ±1 dgt. of calculation from each measurement value (DPF calculated from phase difference between fundamental voltage and current waveforms)
Active or Reactive Energy Consumption Selectable between consumption, regeneration, lag and lead
Accuracy ±1 dgt. applied to active and reactive power measurement accuracy
Demand Selectable between active or reactive power
Accuracy ±1 dgt. applied to active and reactive power measurement accuracy
Harmonic Analysis Orders Up to 50th (2048 points/window, rectangular)
Harmonic Voltage, Current and Power Accuracy (accuracy is not defined for harmonic power) 1st to 15th order ±0.5% rdg. ±0.2% f.s. 16th to 25th order ±1.0% rdg. ±0.3% f.s. 26th to 35th order ±2.0% rdg. ±0.3% f.s. 36th to 45th order ±3.0% rdg. ±0.3% f.s. 46th to 50th order ±4.0% rdg. ±0.3% f.s. (add accuracy of clamp sensor to harmonic current accuracy)
Other Measurement Items Peak Voltage and Current, K Factor, Voltage Unbalance Factor, Max/Min/Ave of Time Series
Event Detection
Voltage Swells (Rise), Voltage Dips (Drop), Interruptions RMS value detected using voltage (1/2) measured every half cycle
Inrush Current RMS value detected using current (1/2) every half cycle
Transient Overvoltage Detection Range: 50 Vrms (±70.7 Vpeak equiv.) or more, 10 to 100 kHz
Timer Detection Detect events at preset intervals selectable from OFF, 1, 5, 15 or 30 minutes; 1, 2 or 12 hours; or 1 day
Manual Detection Detect events when keys are pressed
Thresholds Set to OFF or to specified value, except for detection of transient overvoltages. (Waveform recording not available for transients.)
Event Recording Lengths Waveform 20ms before detection + 200ms upon detection + 20ms after detection
Event voltage fluctuation graph 0.5s before + 2.5s after detection Inrush current graph 0.5s before + 29.5s after detection
Maximum Number of Recordable Events 50 event waveforms, 20 event voltage fluctuation graphs, 1 inrush current graph, 1000 event counts
Input Specifications
Wiring Configurations Single-phase 2-wire (1P2W), single-phase 3-wire (1P3W), three-phase 3-wire (3P3W2M and 3P3W3M), three-phase four-wire (3P4W and 3P4W2.5E)
Measurement Line frequency Auto-select (50/60 Hz)
Maximum Allowable Input Voltage Voltage input terminal: 780 V AC (1103 Vpeak)
Current input terminal: 1.7 V AC (2.4 Vpeak)
Maximum Rated Voltage to Ground Voltage input terminal: CATIII 600 V AC, CATIV 300 V AC (50/60 Hz)
Current input terminal: per clamp-on sensors used
Measurement Method Simultaneous digital sampling of voltage and current (sampling frequency: 10.24 kHz per channel)
Voltage Measurement Range 600.0V (Crest factor 2 or less)
Current Measurement Range: Manual ranging according to clamp sensor (Crest factor 3 or less)
Clamp Sensor Range Clamp Sensor Range
9657-10,
9675
500.0 mA/
5.000 A
9661,
9667 (500A)
50.00 A/
500.0 A
9694,
9695-02
5.000 A/
50.000 A
9669 100.0 A/
1.000 kA
9660,
9695-03
10.00 A/
100.0 A
9667 (5000A) 500.0 A/
5.000 kA
Power Measurement Range: Depends on combination of current range and measurement line
500mA 300.0W/
600.0W/
900.0W
100A 60.00kW/
120.0kW/
180.0kW
5A 3.000kW/
6.000kW/
9.000kW
500A 300.0kW/
600.0kW/
900.0kW
10A 6.000kW/
12.00kW/
18.00kW
1kA 600.0kW/
1.200MW/
1.800MW
50A 30.00kW/
60.00kW/
90.00kW
5kA 3.000MW/
6.000MW/
9.000MW
BASIC SPECIFICATIONS
Display 4.7-inch color STN LCD
Display languages English, Japanese or Chinese (Simplified)
Display refresh rate Approx. once per second
Clock functions Auto calendar, auto leap year, 24-hour format
Real-Time Clock accuracy Within 13 seconds/month
Internal Memory Capacity 4MB
Maximum recording time 125 Days
Interval Settings AUTO, 1, 5, 15 and 30 min., and 1 hour (AUTO sequentially selects 1, 2, 10, 30 seconds, 1, 5, 15 and 30 min., and 1 hour automatically)
Demand period 15 min., 30 min. and 1 hour
Recordable Items All parameters (incl. max/min/average values)
INTERFACE SPECIFICATIONS
Interface USB 2.0 (Full Speed)
Connection destination Computer operating on Windows 2000/XP
ENVIRONMENTAL AND SAFETY-RELATED SPECIFICATIONS
Operating environment Indoors, up to 2000 m (6562-ft.) ASL
Temperature and humidity Storage -10 to 50°C (14 to 122°F), 80% RH or less (non-condensating)
Operation 0 to 40°C (32 to 104°F), 80% RH or less (non-condensating)
Applicable standards SafetyEN61010-1: 2001, Pollution degree 2, Measurement Categories III (600 V) and IV (300 V) (anticipated transient overvoltage 6000 V)
EMCEN61326:1997 + A1:1998 + A2:2001 + A3:2003 Class A; EN61000-3-2:2000, EN61000-3-3:1995 + A1:2001
Power source Model 9418-15 AC Adapter or Model 9459 Battery Pack (Maximum rated power: 23 VA (with AC adapter)
Continuous operating time with battery pack Approx. 6 hours (after full charge, with 5 min. auto-off LCD backlight)
Dimensions and mass 128 W × 246 H × 63 D mm (5.04”W × 9.69”H × 2.48”D) (including stand)
Approx. 1.2 kg (42.3 oz.) (with battery pack)